Cisco IE 3000 Switch Getting Started Guide
Step 4 Push in the upper and lower module latches to secure the module to the switch.
202336
Step 5 If you are installing a second module, repeat Step 2 to Step 3, but secure the second module to the right side of the first module.
Running Express Setup
When you first set up the switch, you should use Express Setup to enter the initial IP information. Doing this enables the switch to connect to local routers and the Internet. You can then access the switch through the IP address for additional configuration.
You need this equipment to set up the switch:
•A PC with Windows 2000, Windows Vista, Windows 2003 or XP installed.
•A web browser (Internet Explorer 6.0, Internet Explorer 7.0, or Firefox 2.0) with JavaScript enabled.
•A
Disable any
Cisco IE 3000 Switch Getting Started Guide
| 5 | |
|