Cisco Systems IE 3000 warranty Connecting to Dual-Purpose Ports, Connecting to 100BASE-FX Ports

Page 24

Cisco IE 3000 Switch Getting Started Guide

Connecting to Dual-Purpose Ports

Only one port on a dual-purpose port can be active at a time. If both ports are connected, the SFP module port has priority.

Follow these steps:

Step 1 Insert either an RJ-45 connector to the 10/100/1000 port (see the “Connecting to 10/100 and 10/100/1000 Ports” section on page 22), or install an SFP module into the SFP module slot, and connect a cable to the SFP module port. (See the “Installing SFP Modules and Connecting to Ports” section on page 23.)

Step 2 Insert the other cable end into the other device.

Connecting to 100BASE-FX Ports

Follow these steps:

Step 1 Insert an LC cable into the 100BASE-FX port of a Cisco IEM-3000-8FM expansion module.

202328

Step 2 Insert the other cable end into the other device.

Verifying Port Connectivity

After you connect to the switch port and another device, the port LED turns amber while the switch establishes a link. This process takes about 30 seconds, and then the LED turns green when the switch and the target device have an established link. If the LED is off, the target device might not be turned on, there might be a cable problem, or there might be a problem with the adapter installed in the target device.

 

Cisco IE 3000 Switch Getting Started Guide

24

OL-16234-01

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Cisco IE 3000 Switch Getting Started Guide About This GuideTaking Out What You Need Connecting Expansion Modules 202334 203759 202335 Running Express Setup Connect power to the switch Connection Cisco IE 3000 Switch Getting Started Guide Managing the Switch Using the Device ManagerRefreshing the PC IP Address Command-Line Interface Downloading Cisco Network AssistantInstalling the Switch Other Management OptionsEquipment That You Supply Before You BeginInstallation Warning Statements 140F 60C Statement Cisco IE 3000 Switch Getting Started Guide Mounting the Switch to a DIN Rail or to the Rack Adapter Foot LatchGrounding the Switch Inch 12.7 mmWiring the DC Power Source Follow these steps to prepare the DC power cableInch 6.6 mm Attaching the Power and Relay Connector Connecting to the Switch Ports Optional ProceduresConnecting to 10/100 and 10/100/1000 Ports Installing SFP Modules and Connecting to Ports Connecting to Dual-Purpose Ports Connecting to 100BASE-FX PortsVerifying Port Connectivity Troubleshooting Express Setup Case of DifficultyResetting the Switch Accessing Online Help For More InformationObtaining Documentation and Submitting a Service Request Cisco One-Year Limited Hardware Warranty TermsDuration of Hardware Warranty To Receive a Return Materials Authorization RMA Number Cisco IE 3000 Switch Getting Started Guide Cisco IE 3000 Switch Getting Started Guide
Top Page Image Contents