Cisco Systems IE 3000 warranty Wiring the DC Power Source

Cisco IE 3000 Switch Getting Started Guide

Step 3 Insert the ground wire into the ring terminal lug, and using a crimping tool, crimp the ring terminal to the wire.

119626

Step 4 Slide the ground screw from Step 1 through the ring terminal.

Step 5 Insert the ground screw into the ground-screw opening on the front panel.

202329

Step 6 Use a ratcheting torque screwdriver to tighten the ground screw and ring terminal lug to the switch front panel to 8.5 in-lb, the maximum recommended torque.

Step 7 Attach the other end of the ground wire to a grounded bare metal surface, such as a ground bus, a grounded DIN rail, or a grounded bare rack.

Wiring the DC Power Source

Follow these steps to prepare the DC power cable.

Warning Before performing any of the following procedures, ensure that power is removed from the DC circuit. Statement 1003

	Cisco IE 3000 Switch Getting Started Guide
18	OL-16234-01