Cisco Systems IE 3010 manual 207231

Chapter 2 Switch Installation

Installing the Switch

Figure 2-2 Attaching Brackets for 19-Inch Racks

2

1

207231

3

1

1

2

Phillips flat-head screws 3 Power-supply-side mounting position

Cable-side-mounting position

Attaching Brackets for 19-Inch Racks for IP-30 Compliance (Optional)

Before installing the mounting brackets, you need to install the rubber plugs in the unused mounting holes. The rubber plugs are not supplied with the switch. You can order a kit (part number IE-3010-IP30KIT) containing the rubber plugs.

You can order a kit (part number IE-3010-IP30KIT) that contains the rubber plugs.

Figure 2-3shows a close-up of the rubber plug. You can install the rubber plugs in the holes as shown in Figure 2-4and Figure 2-5.

Cisco IE 3010 Switch Hardware Installation Guide

2-6 78-19581-02