Cisco Systems SFS 7012 manual ShowChassisIpAddr, SetChassisIpAddr, NetMask

Sample Output:

PING 172.26.0.254: 56 data bytes

64bytes from 172.26.0.254: icmp_seq=0. time=0. ms

64bytes from 172.26.0.254: icmp_seq=1. time=0. ms

64bytes from 172.26.0.254: icmp_seq=2. time=0. ms

64bytes from 172.26.0.254: icmp_seq=3. time=0. ms

64bytes from 172.26.0.254: icmp_seq=4. time=0. ms

----172.26.0.254 PING Statistics----

5packets transmitted, 5 packets received, 0% packet loss round-trip (ms) min/avg/max = 0/0/0

NOTES: This routine spawns a process to send ping packets to the specified IP address. If packetCount is given, the process exits after that number of packets are sent. If packetCount is ommitted, a default the number of packets defaults to 5. If packetCount is 0, the ping task will continue until the CLI is restarted (ctrl+c).

showChassisIpAddr

Displays the chassis IP address.

Syntax:

showChassisIpAddr

Options:

None.

Sample Output:

-> showChassisIpAddr

Chassis IP Address: 172.26.0.221 Net mask: 255.255.240.0

setChassisIpAddr

Change the module IP address.

Syntax:

setChassisIpAddr -h ipaddress -m netMask

Options:

-h ipaddress

The new IP address in dotted notation format 'xxx.xxx.xxx.xxx'.

-m netMask

The network mask. (may be in dotted notation or hexidecimal format)

Sample Output:

-> setChassisIpAddr -h 172.26.0.221 -m 255.255.240.0

Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide

B-26 OL-8787-05