Cisco Systems SFS 7012 manual SubnetManagement, SmControl, SmConfig

Sample Output:

-> bootSelect 105 -noprompt

Currently installed			firmware versions
index : alias		: version
--------------------------
*# 1	: image1	: 4.1.1.1.11;
2	: image2	: 3.4.0.11.3;

*- indicates Default image (will run at next reboot)

# - indicates Active image

Default boot image index = 1

NOTES: This command allows the user to set the next boot image for the device. A '*' next to the image entry indicates the currently selected bootimage. A '#' indicates the currently active bootimage.

SubnetManagement

Note The Subnet Management CLI commands are not currently supported.

smControl

Starts and stops the embedded subnet manager.

Syntax:

smControl start stop restart status

Options:

Start

Start the SM.

Stop

Stop the SM.

restart

Restarts the SM.

status

Prints out the SM Status.

Sample Output:

-> smControl start

Starting the SM...

smConfig

Configure startup parameters of the embedded subnet manager.

Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide

B-34 OL-8787-05