Cisco Systems SFS 7012 manual IsmPortSet12x

Syntax:

ismAutoClearConf [disable enable [warn] [log_first]]

Options:

-enable

Enable the auto-clear feature.

-disable

Disable the auto-clear feature.

-warn

Generate warning log messages instead of the default information messages.

-log_first

Log first clear (otherwise the first clear is not logged).

Sample Output:

-> ismAutoClearConf enable

Auto clear is enabled

Note This feature will log every time a counter has reached its maximum capacity. This may be useful for diagnostics purposes, specifically for bad cables. This feature is only available on certain switch hardware platforms.

ismPortSet12x

Note This command is not currently supported.

Allows the user to view, set and unset port link width to 12X for specific port(s).

Syntax:

ismPortSet12x portName [enable12xBit]

Options:

-portName

A valid 6 or 7 character port name (e.g., S1AL01a or L01P01).

-enable12xBit

1=enable, 0=disable.

Sample Output:

-> ismPortSet12x S1AL01a

S1AL01a 12x mode is DISABLED

Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide

B-60 OL-8787-05