Cisco Systems manual Changing the IP Address and Default Gateway, SFS 7012 RS-232 Connector

Page 31

Note If the spine module RS-232 port is connected to a terminal emulation program, the user will be able to view the switch boot process. Be certain to use a null-modem/crossoverserial cable for the console port. The settings for the terminal emulation device should be:

–8 data bits

–no parity bits

–1 stop bit

–57600 baud

–Use VT100 emulation.

–Flow control = XON/XOFF

Figure 1-11 SFS 7012 RS-232 Connector

(Unmanaged)

 

Fan

 

 

 

2 (Managed)

 

3

 

 

1 (Managed)

 

Spine Module

 

 

 

 

 

 

RS-232 Port

PS

PS

PS

Fan

1

3

2

1

 

Step 3 The system prompts for a user name. In order to change the IP address and default gateway, the user must be logged in as the administrator. At the prompt enter:

super

Step 4 The system prompts for a password. At the prompt enter:

super

The system responds with:

Welcome to the SFS 7012 CLI. Type 'list' for the list of commands.

Step 5 Verify the IP address with the command line interface (CLI) command showChassisIpAddr command. The system returns the information similar to the following:

Chassis IP Address: 192.168.100.9 Net mask: 0xffffff00

Changing the IP Address and Default Gateway

There are 3 methods to change the IP address and default gateway of the chassis:

•Using the serial port.

•Logging into the CLI over Ethernet from a system that can reach the chassis using the default IP address (192.168.100.9).

Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide

 

OL-8787-05

1-21

 

 

 

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide Page Preface Logging Snmp Deprecated New and Changed Information Changed Feature Description Release Where Documented Preface Conventions A P T E R InstallationStatement 1019-Main Disconnecting Device Statement 1045-Short-circuit Protection Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide Page Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide Rack Specifications and Recommendations Planning the InstallationCable Requirements Uninterruptible Power SupplyCable Distances Safety Information Installation Tasks ChecklistPrecautions for Rack-Mountable Products Protecting Against Electrostatic Discharge Electrical Safety PrecautionsTools, Equipment and Personnel Required Check the Installation SiteUnpack the Equipment Installation TasksMark the Rack Install the Rails in the RackMounting Hardware Kit Contents Mounting KitRack-Mount the Switch Secure Chassis to Rail Installing the Switch Face Plate Removing a Module or Blank Installing the Spine and Leaf ModulesLeaf Connect Equipment to the Ports and Power On the SystemLeaf Start-up Procedures Connecting PowerBringing Up the System For the First Time 11 SFS 7012 RS-232 Connector Changing the IP Address and Default GatewayUsing Telnet or SSH Using the RS232 Serial PortUsing the Chassis Viewer GUI Click in the Gateway address field Enter the new switch default gateway IP address Click Apply Information similar to the following NEW IP Address RJ45 LEDs SFS 7012 Component LEDsChassis Status LED Subnet Manager Agent SMA LEDSpine and Leaf Module Status LED Power Supply LEDsSFS 7012 Leaf and Spine Module LEDs Leaf Module IB Port LEDsSpine Module Management LEDs Shutdown ProceduresHot Swapping Components Hot Swapping Spine and Leaf ModulesHot Swapping the Fan Unit Hot Swapping Power SuppliesTighten the captive panel screw Operations and Administration Home Chassis Viewer ManagesLeaf Module View Displaying the Leaf and Spine Module Views? Help Button Support ButtonLeaf Module Mouseover Spine Module ViewLeaf and Spine Details Header Leaf and Spine Module Component Details AreaLeaf and Spine Information Area Apply Displaying the Chassis ViewRefresh Chassis View Component Details Area Rebooting Components from Chassis ViewerChassis Details Header Chassis View Component Information Area Tabs Chassis View Component Information AreaSystem Tab LEDs and Sensors TabChassis FRU Tab Power TabStatus Modifying Switch Component InformationFan Tab Backplane TabLogging Chassis View MenuSet Level 23 Log System Configurator Device Tab Preset Tab Syslog Tab Configure Syslog on a Linux ServerType /etc/init.d/syslog restart, and press Enter 27 Reset Levels Button Reset Log LevelsFirmware Update Maintenance32 Ldap Configuration Button Ldap Configuration34 HTTP/CLI Session Configuration Button HTTP/CLI Session ConfigurationSnmp Target ConfigurationSnmp Target Addresses Target Configuration Window Field DescriptionsSnmp Target Parameters Filter Status 40 Filter Status Button Setting Community StringsAdminister Configuration File AdministrationHost Upload/Download 46 Configuration File Administration ScreenDownload saved configuration files from the CMU to a server Trap Control Click Config File AdminChassis Group Chassis TrapsIcsChassisTrapSystemSelfTestFailure IcsChassisTrapModuleReboot IcsChassisTrapSystemRebootIcsChassisTrapSystemSwitchFailover IcsChassisTrapModuleBulkPowerFailureIcsChassisTrapPowerSupplyFanFailed IcsChassisTrapPowerSupplyRemovedIcsChassisTrapPowerSupplyFailed IcsChassisTrapPowerSupplyEEPROMReadFailureLeaf modules/ports Interswitch Link ISL PortsSFS 7012 Port Statistics Understanding Port Naming ConventionsPort Statistics Field Descriptions InfiniBand Statistics Leaf Modules Leaf and Spine Module IB Port StatisticsSpine Modules 59 Spine Port Stats Menu Set Field ThresholdsPortRecvPktsThresh PortXmitDataThreshPortRecvDataThresh PortXmitPktsThreshTime Service Click the Use Network Time Protocol? checkbox 63 Switch Time ServiceDaylight Saving Time Tips Time Zone TipsConfiguring the Switch Default Gateway IP Address Configuring the Switch OOB IP AddressFrom the OOB LAN IP submenu, click Set Default Gateway IP Type in the correct switch default gateway IP address Viewing the Log Spine View MenuSelect Edit, Copy or Ctrl + C Purging the LogSelect Edit, Paste or Ctrl + 78 Purge Log Confirmation Window Select Boot ImageAdding a New License Key License Keys Key AdministrationDeleting a License Key Click OK to delete Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide Technical Specifications Table A-1 SFS 7012 Technical Specifications Operator AdministratorCommands and Functional Groups Capture Accessing the CLIOnline Help Keyboard ShortcutsGeneral Groups and CommandsHelp command CommandNoprompt ListList group -noprompt -verbose GroupHistory RebootWho KillCliSessionSwapBsDel BroadcastBroadcast msg MsgGetTermWidth SetTermWidthPrompt ShowLastRetCode RloginRcmd Logout ResetCardUser UserAdd PasswdUserListShow UserRemUserRem username UserListShowSetldapSvrIpAddr LoginModeIdleTimeoutSet IdleTimeoutGetSetldapSvrPort SessionTimeoutEnable SessionTimeoutDisableLoginMsgGet LoginNameGet LoginMsgSetLoginNameSet SerialAuthSet SerialAuthGetExit DeprecatedExit HwMonitor ChassisShowIBNodeDesc FruInfo slot-all SetIBNodeDescSetIBNodeDesc New Node String FruInfoIgnoreInvalidType ChassisQueryShowType Type cardtypeShowInventory ShowInventorySample Output NetworkIfShow OptionsPing ipAddress packetCount RouteShowRouteShow PingSetChassisIpAddr -h ipaddress -m netMask ShowChassisIpAddrShowChassisIpAddr SetChassisIpAddrSetDefaultRoute ShowDefaultRouteArpShow HostShow HostShowFwUpdateChassis FwUpdateSlotFirmware FwListFiles FwShowUpdateParamsShowCapability FwSetUpdateParamsShowLastScpRetCode FwVersion slot BootQueryBootQuery slot -active -alternate -all FwVersionIndex BootSelectActive AlternateSubnetManagement SmConfigSmControl SmShowLids SmConfigSmShowLids Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide SmSetPriority SmShowPrioritySmSetSweepRate SmForceSweep BmSetSweepRateBmForceSweep SmShowGroups -h SmShowServicesSmShowServices SmShowGroupsSmShowSubscriptions SmShowSubscriptionsSmShowMasterLMC SmShowMasterLMCSmShowMasterLid SmSetMasterLMCSmShowLidMap SmShowMaxLid SmSetSwitchLifetimeSmSetHoqLife SmShowSMParms SmSetVLStallSmShowPKeys SmSetPKeySmShowKey SmSetKeySmSetMKey SmShowMKey SmOptionConfigSmShowDefBcGroup SmSetDefBcGroupSmShowGidPrefix SmSetGidPrefixSmSetSubnetSize LogShow LogSmShowSubnetSize SmShowSubnetSizeLogClear LogConfigureLogConfigure LogClearLogResetToDefaults LogResetToDefaultsLogShowConfig LogSyslogConfigLogSyslogConfig -h xxx.xxx.xxx.xxx -p xxxx -f LogShowConfigShowKeys KeyManagementShowKeys AddKey IbSwitchInfoRemoveKey Spine IsmPortStatsCols LeafIsmPortCounters IsmLinearFwdb IsmPortCounters -clear -active -errors -potential -nopromptErrors PotentialIsmMultiFwdb IsmLinearFwdb switchSwitch IsmMultiFwdb switchIsmPortSet12x IsmChassisSet12x IsmChassisSet12x enable12xBitIsmChassisSetSpeed speed IsmPortEnableIsmPortEnable port IsmChassisSetSpeedIsmPortDisable port IsmChassisSetEnableIsmChassisSetEnable enable IsmPortDisableIsmIslSet12x IsmIslSet12x enable12xBitIsmPortSetSpeed IsmPortSetSpeed port speedIsmIslSetSpeed speedFlag IsmChassisSetMtuIsmChassisSetMtu mtu IsmIslSetSpeedIsmShowPStatThresh IsmShowPStatThreshThreshold IsmSetPStatThreshIsmSetPStatThresh field threshold FieldCisco SFS 7012 InfiniBand Server Switch Hardware Users Guide Time TimeManagementTimeZoneConf TimeDSTConf sw sd sm ew ed em TimeNtpTimeoutTimeNtpTimeout numSeconds TimeDSTConfTimeNtpRefreshTime NumSecondsTimeNtpRefreshTime numSeconds SnmpCommunityConf -r readonlycommstr -w readwritecommstr SnmpCommunityConfSnmpTargetAddr Delete ShowAdd EditDisplays the snmpNotifyFilterProfileTable entries SnmpTargetParamsDisplays the snmpTargetParamsTable entries SnmpNotifyProfileSnmpNotify SnmpNotifyFilterDisplays the snmpNotifyFilterTable entries SnmpNotifyFilter showSnmpUsrSec SnmpSystemSnmpUsrSec add show edit delete name -a algo key Capture CaptureCapture CaptureIsm CaptureFwCaptureLog CaptureSmCaptureNetwork CaptureChassisCaptureMisc CaptureShell CaptureSnmpCaptureSnmp CaptureShellPower Supply SwitchProblem Fix OOB Ethernet RJ45 Port SFS 7012 Leaf Module IB Ports Problem FixInvalid IP Address entered via Console Port SymptomsResolution / Workaround InfiniBandCisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
Related manuals
Manual 116 pages 14.21 Kb
Top Page Image Contents