Cisco Systems SFS 3012 manual Install InfiniBand Switch Cards, 7Inserting a Switch Card

11

Install InfiniBand Switch Cards

To install a switch card, perform the following steps:

1.Ground yourself appropriately.

2.Remove the blanking panel if one resides in the slot with a #1 Phillips-head screwdriver.

3.Remove the switch card from any packaging.

4.Extend the ejector levers on the left- and right-hand sides of the switch card completely.

5.Insert the switch card into slot 15 or slot 16 such that the ejector levers sit on the bottom of the switch card.

6.Press the switch card firmly into the slot so the fasteners begin to close.

Figure 2-7:Inserting a Switch Card