33
Viewing and Updating the Software Image on the Chassis
View the Software Image Version with the CLI
1.To view the primary software image version for all cards in the chassis, use the show
2.Note that it is possible to have different versions of software installed on different slots. To update an individual Fibre Channel or Ethernet Gateway, perform the steps as described here, but you do not need to reboot the chassis. After the copy and installation, you can enable and disable an individual gateway to activate the new image.
Example
Topspin-360# show card-inventory
================================================================================
Card Resource/Inventory Information
================================================================================
<output truncated>
3.To view all existing boot images that exist on the chassis (whether or not they are currently being used), use the dir image command.
A .img file is an image file that is not installed.