Cisco Systems SFS 3012 manual Attach a Serial Console Cable to a PC or Terminal

26

13.Adjust the front of the rails (that you left loose in step 10) so that the threaded hole in the center of the front of the rail aligns with the screw in the flange.

14.Screw the flange screws tightly into the rails, as shown in Figure 3-8.

Figure 3-8:Securing the Chassis to the Rails

15. Firmly tighten the front rail screws.

For the VFrame Evaluation Test Plan, continue to step b of “Hardware Installation Steps” on page 13 in the “VFrame Evaluation Test Plan”.

Attach a Serial Console Cable to a PC or Terminal

1.Connect the cable from the Topspin serial console to your terminal or management workstation. Use the straight-through M/F serial cable, which is provided in the Topspin package.

NOTE: For detailed information on how to connect the serial console cable, please see the documentation included with the serial cable kit.

2.Open a terminal emulation window using a program such as HyperTerminal for Windows. Set your terminal parameters to the following:

•Baud: 9600 bps

•Data Bits: 8

•Parity: None