Cisco Systems SFS 3012 manual Fibre Channel Gateway LEDs, FC Port LEDs

Page 73

55

Fibre Channel Gateway LEDs

The FC gateway provides one yellow (amber) LED and one green LED. Table 5-9lists and describes the LED indications.

Table 5-9:Gateway LED Indications

Display

Indication

yellow on, green off

Auxiliary power has reached the gateway.

 

 

green on, yellow off

Gateway runs successfully.

 

 

green on and yellow on

An error has occurred

 

 

FC Port LEDs

Fibre Channel Port LEDs are adjacent to each FC port. They indicate port status and activity. Each port has a one bi-color, green/yellow, LED to indicate port status. When you enable a Fibre Channel interface card, and a Fibre Channel device is already connected, the run light (LED) of the Fibre Channel interface port changes from yellow to green, indicating that a connection has been established between the Fibre Channel device and the port.

Figure 5-6displays the FC LEDs.

port status

port speed

Figure 5-6:The Fibre Channel interface LEDs

Table 5-10explains the FC port status LED.

Table 5-10:Interpreting the Fibre Channel Port-Status LEDs

Led

Description

off

Optic module or cable is not attached.

 

 

solid yellow

A cable is attached but the port is offline.

 

 

slow pulsing yellow (2 second intervals)

Port is disabled, and fiber installed as the result of

 

diagnostics or Fibre Channel portDisable command.

 

 

fast pulsing yellow (half-second intervals)

Signal detected but port fault is also detected.

 

 

solid green

The port is online and a signal is detected.

 

 

slow pulsing green (2 second intervals)

The port is online with a loop-back cable attached or an

 

incompatible device.

 

 

fast pulsing green (half-second intervals)

The port is online but running some internal diagnostics.

 

 

sporadic flickering green

The port is online and packet traffic is detected.

 

 

Image 73
Contents Part Number OL-7722-01 Product ID Page Contents Regulatory Notices Vii Install and Boot the Topspin Specifications and Compliance Page Regulatory Notices FCC Statement Safety InformationElectrical Cautions Viii Laser Cautions General CautionsLaser Specs Contact InformationThank YOU for Purchasing Your Topspin Product Product RegistrationXii Standard Product Agreement Xiv Page Xvi Xvii Xviii Introduction Topspin 360 OverviewPerformance FeaturesUnified Fabric Transparent TopologyScalability Redundancy and High-AvailabilityPage Topspin 360 Components Controller Cards Install a Controller Card2Inserting the Controller Card 3Closing the Ejector Lever Replacing and Updating Your Gateways Ethernet and Fibre Channel GatewaysInstall an Ethernet or Fibre Channel Gateway InfiniBand Switch Cards7Inserting a Switch Card Install InfiniBand Switch Cards8Closing Switch Ejector Levers Remove InfiniBand Switch Cards Power Supply Modules10Power Supply Modules Install Power Supply ModulesInstall Blower Trays Removing a Power SupplyBlower Trays Removing Blower Trays Page Page Prepare the Site for the Topspin Install and Boot the TopspinRack the Topspin Install Topspin 360 ComponentsRead the Cautionary Statements Prepare the Physical Environment for Topspin1Positioning the Side Flanges 3Rail Positioning 4Attaching Rails from the Front 5Attaching Rails from the Back 6Positioning the Chassis on the Rails 8Securing the Chassis to the Rails Attach a Serial Console Cable to a PC or TerminalAssign a Static IP Address Boot your Topspin 360 and Configure Basic ConnectivityObtain an IP Address with Dhcp Enter the interface mgmt-ethernet commandConnect InfiniBand Hosts 9Fully Installed IB Cable with Pinch Connector 11Removing a Pinch Connector Manage the Topspin 12Removing a Pull ConnectorView the Software Image Version with the CLI Viewing and Updating the Software Image on the ChassisView the Software Image Version with the GUI An installed image file will have a slash / in the name14View Current Image of an Individual Card Upgrade the Software Image with the CLIUpgrade the Software Image with the GUI 15Copy an Image File to the Switch Delete an Image with the CLI 16Specify the Boot ConfigurationDelete an Image with the GUI Select Maintenance File ManagementPage Expansion Modules Topspin 360 Field Replaceable UnitsConfiguring a New InfiniBand Switch Card Installing an InfiniBand Switch CardUpdate the switch card firmware. Enter the install command Removing an InfiniBand Switch Card Power ModulesInstalling a Power Supply 2Power Supply Module Positioning Replacing Blower Trays Installing a Blower TrayRemoving a Blower Tray Page Topspin 360 LEDs Activity Indication Topspin 360 System LED1Power Supply LEDs Power Supply LEDs2Blower Tray LEDs Blower Tray LEDsLED State Indication Controller Card LEDsIB Port LEDs IB Switch Card LEDsFC Port LEDs Fibre Channel Gateway LEDsEthernet Port LEDs Ethernet Gateway LEDsGeneral Specifications Specifications and ComplianceCertifications/Regulatory Electrical SpecificationsLaser Specs Topspin P/N Application Optical Parameters Page Index
Related manuals
Manual 28 pages 17.41 Kb

SFS 3012 specifications

Cisco Systems SFS 3012 is a network switch designed to enhance the performance of data centers and enterprise networks. With its innovative architecture and advanced features, it caters to the increasing demands for high bandwidth and low-latency networking environments. This model leverages Cisco's expertise in networking technology to deliver reliable and scalable solutions for organizations.

One of the main features of the SFS 3012 is its ability to support high-speed data transfer with 10 Gigabit Ethernet (10GbE) ports. This provides significant improvement in data throughput, enabling faster communication between servers and network devices. With twelve 10GbE ports, the SFS 3012 is capable of handling intensive workloads, making it ideal for cloud computing and big data applications.

The SFS 3012 employs various networking technologies that enhance its operational efficiency. It supports data center bridging (DCB), which optimizes traffic flow and ensures low-latency communication for storage and server traffic. This feature is particularly beneficial in virtualization environments where multiple virtual machines operate simultaneously.

Additionally, the switch utilizes Cisco's innovative virtual extensible LAN (VXLAN) technology, enabling the creation of scalable, isolated virtual networks. This is crucial for enhancing network segmentation and security in multi-tenant data center environments. The ability to create virtual networks without the constraint of physical boundaries allows organizations to scale their networks seamlessly according to their needs.

Security is another critical characteristic of the SFS 3012. It implements advanced security protocols to protect the integrity of data transmissions. Features such as access control lists (ACLs), port security, and authentication protocols help safeguard sensitive information from unauthorized access.

Moreover, the SFS 3012 is designed with energy efficiency in mind. It incorporates features that minimize power consumption, helping organizations reduce their operational costs while also supporting sustainability initiatives.

In conclusion, the Cisco Systems SFS 3012 is a powerful network switch ideal for modern, demanding networking environments. With its high-speed connectivity, advanced networking features, strong security measures, and energy efficiency, it provides an effective solution for organizations looking to enhance their infrastructure and performance. As businesses increasingly embrace digital transformation, devices like the SFS 3012 will play a crucial role in supporting their growth and innovation.