Cisco Systems SFS 3012 manual General Cautions, Laser Cautions

ix

CAUTION: Use only Topspin-approved gateway expansion modules, controller cards, fans, and power supply modules.

CAUTION: Never place your hand inside an empty card or module bay. You should never have cause to place a hand anywhere inside the Topspin chassis. Unused card and module bays should always have a Topspin cover over the bay to ensure proper safety, ventilation, and cooling.

CAUTION: The Topspin 360 contains hot-swappable controller, fan/blower tray, switch controller, power supply, and gateway expansion modules. The operator may swap these components while power is still applied to the Topspin 360.

General Cautions

CAUTION: No user is authorized to remove the Topspin 360 enclosure cover. The internal chassis contains no user-serviceable components. Removing the enclosure cover voids your warranty. See the warranty card for further details regarding the servicing of your chassis.

CAUTION: Opening and/or modifying expansion and system modules may void your warranty. Refer to your warranty to determine access restrictions.

In general

•Do not spill food or liquids on your Topspin 360 components.

•Protect your Topspin 360 from sudden power-surges and interruptions by using a surge suppressor, line conditioner, or uninterruptable power supply (UPS).

•Place cables appropriately so that they do not obstruct any egress within the data center and they do not block any ventilation inlets or outlets.

•Rack mount the Topspin chassis according to the rack manufacturer recommendations.

CAUTION: Installing the Topspin 360 into a rack is a 3-person process due to the weight and size of the 4U unit.

Laser Cautions

CAUTION: Only qualified service technicians should repair laser devices.