Cisco Systems 3560-C manual Mounting Tray with a Magnet, Switch Number-10 Phillips pan-head screws

Chapter 2 Switch Installation

Mounting the Switch

Step 5 Use the two number-10 Phillips pan-head screws to secure the mounting tray to the switch. See Figure 2-10.

Figure 2-10 Securing the Mounting Tray to the Switch

1

MODE

CONSOLE

SYST STAT DPLX SPD PoE PD

1	2		3
				4	5	6			Series
							7
								8
POWER	OVER	ETHERNET						1
								2

PD

282397

2

1

Switch

2

Number-10 Phillips pan-head screws

Warning To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 in. (7.6 cm) Statement 1076

Mounting Tray with a Magnet

You can use a magnet with the mounting tray to mount the switch:

•On a metal surface

•Under a metal surface

•On a metal wall

Caution Do not use the magnet without a mounting tray.

This example shows you how to mount the switch on a metal wall. You can use a similar procedure to mount the switch under a metal desk or on a metal desk.

	Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
OL-23803-02		2-15