Cisco Systems 3560-C Mounting the Switch on a DIN Rail, Securing the DIN-Mount Tray to the Switch

Chapter 2 Switch Installation

Mounting the Switch

Step 2 Use the two number-10 Phillips pan-head screws to secure the DIN rail mount to the switch. See Figure 2-18.

Figure 2-18 Securing the DIN-Mount Tray to the Switch

1

		SYST
		STAT
		DPLX	1
MODE		SPD		2		3
		PoE					4	5	6			Series	PD
	CONSOLE	PD								7	8
			POWER
				OVER	ETHERNET						1			3
											2
														34421

2

1

Switch

2

Number-10 Phillips pan-head screws

Mounting the Switch on a DIN Rail

Caution Do not install the switch with its front panel facing up. Following safety regulations, install the switch with its front panel facing down, to allow sufficient airflow and to provide easier access to the cables.

Warning To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 in. (7.6 cm) Statement 1076

Step 1 Position the switch directly in front of the DIN rail, making sure that the top of the DIN rail mount clip hooks over the top of the DIN rail. See Figure 2-19.

	Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
OL-23803-02		2-21