Cisco Systems manual Table A-2 Catalyst 3560-C and 2960-C Switch Specifications

Page 74

Appendix A Technical Specifications

Table A-2 Catalyst 3560-C and 2960-C Switch Specifications (continued)

Power consumption1	• Catalyst 2960CPD-8TT-L: 15 W, 51 BTUs per hour (AC)
	14.5 W, 50 BTUs per hour (DC PD)
	• Catalyst 2960CPD-8PT-L: 44 W, 74 BTUs per hour (AC)
	43 W, 70 BTUs per hour (DC PD)
	• Catalyst 2960CG-8TC-L: 17.6 W, 60 BTUs per hour
	• Catalyst 2960C-8TC-L: 11 W, 38 BTUs per hour
	• Catalyst 2960C-8TC-S: 11 W, 38 BTUs per hour
	• Catalyst 2960C-8PC-L: 157 W, 88 BTUs per hour
	• Catalyst 2960C-12PC-L: 158 W, 91 BTUs per hour
	• Catalyst 3560CG-8PC-S: 165 W, 109 BTUs per hour
	• Catalyst 3560CG-8TC-S: 19.6 W, 67 BTUs per hour
	• Catalyst 3560CPD-8PT-S: 41.1 W, 88 BTUs per hour (AC)
	40 W, 84 BTUs per hour (DC PD)
	• Catalyst 3560C-8PC-S: 158 W, 74 BTUs per hour
	• Catalyst 3560C-12PC-S: 159 W, 85 BTUs per hour

Power rating	• Catalyst 2960CPD-8TT-L: 0.02 KVA

•Catalyst 2960CPD-8PT-L: 0.05 KVA

•Catalyst 2960CG-8TC-L: 0.04 KVA

•Catalyst 2960C-8TC-L: 0.03 KVA

•Catalyst 2960C-8TC-S: 0.03 KVA

•Catalyst 2960C-8PC-L: 0.16 KVA

•Catalyst 2960C-12PC-L: 0.16 KVA

•Catalyst 3560CG-8PC-S: 0.17 KVA

•Catalyst 3560CG-8TC-S: 0.05 KVA

•Catalyst 3560CPD-8PT-S: 0.05 KVA

•Catalyst 3560C-8PC-S: 0.16 KVA

•Catalyst 3560C-12PC-S: 0.16 KVA

1.BTU values are switch dissipation only (excludes PoE which is dissipated at the end device).

Catalyst 3560-C and 2960-C Switch Hardware Installation Guide

	A-4	OL-23803-02

Image 74

Contents Americas Headquarters Text Part Number OL-23803-02Page N T E N T S Switch Installation Switch LEDs OL-23803-02 Preface Obtaining Documentation and Submitting a Service Request Related PublicationsSwitch Models Switch Model DescriptionFront Panel 3 4 Catalyst 3560CPD-8PT-S Front Panel View PoE Ports Switches with PoE Ports 10/100 and 10/100/1000 Fast Ethernet Downlink PortsPoE Pass-Through PoE Pass-Through PoE Budgeting for the Catalyst 2960CPD-8PT-L SFP Modules USB Type a PortDual-Purpose Ports GLC-FE-100FX= GLC-FE-100LX= GLC-FE-100BX-D=Management Ports USB Mini-Type B PortSwitch Panel LEDs LEDsColor System Status System LEDConsole LEDs Color DescriptionModes for Port LEDs Port Mode DescriptionPort status Port status. This is the default mode Port LEDsColor Meaning PoE LEDDual-Purpose Port LEDs Security slot Power adapter connector Reset button Rear PanelAuxiliary power adapter Internal Power SupplyAuxiliary Power Adapter Security Slots Reset ButtonManagement Options Network Configurations Cisco IOS CLISwitch Installation Preparing for InstallationStatement Installation Guidelines Equipment That You Supply Powering the SwitchBox Contents Verifying Switch Operation Mounting the SwitchDesk- or Shelf-Mounting On a Desk or Shelf without Mounting ScrewsDesk, Shelf, or Wall with Mounting Screws Installing the Mounting Screws on Top of a Desk or a Shelf Mounting the Switch on Top of a Desk or Shelf Under the Desk- or Shelf-MountingInstalling the Mounting Screws Under a Desk or Shelf Desk or shelf Screws Screw template AdhesiveWall-Mounting Desk or shelf Slides on this way77 in .49 cm 72 in .44 cm 46. 62 in .19 cm Switch Location of the Mounting Holes on the SwitchInstalling the Mounting Screws on the Wall With a Mounting Tray Mounting Tray with ScrewsSwitch Mounting tray Sliding direction Desk Installing the Switch on the Mounting TraySwitch Number-10 Phillips pan-head screws Mounting Tray with a MagnetPlace the switch on the mounting tray. See Figure 11 Placing the Switch on the Mounting Tray13 Wall-Mounting with a Magnet Phillips flat-head screw Attaching Brackets to the SwitchA Rack Mounting the Switch in a Rack 15 Attaching the 23-inch Brackets for Rack-MountingSwitch DIN rail mount Attaching the DIN-Mount Tray to the SwitchPlace the switch on the DIN rail mount. See Figure On a DIN RailMounting the Switch on a DIN Rail 18 Securing the DIN-Mount Tray to the Switch19 Mounting the Switch on a DIN Rail Removing the Switch from a DIN Rail Installing a Cover for the Reset Button Optional Switch Reset button coverInstalling the Power Cord Retainer Optional 23 Inserting the Retainer through the Lanced LoopAC power cord Latches Sleeve for thin power cords Slide the retainer through the first latch. See Figure26 Sleeve Around the Power Cord Installing the Cable Guard Optional Washer29 Attaching the Cable Guard to the Switch 31 Attaching the Cables to the Switch Number-8 Phillips wood screws Desk or shelf After Installing the SwitchInstalling SFP Modules Insert a dust plug into the optical ports of the SFP module Removing SFP ModulesTX and which is receive RX Grasp the SFP module, and carefully remove it from the slotBale clasp Connecting Devices to the Ethernet PortsConnecting to the 10/100 and 10/100/1000 Ports Connecting to the PoE Ports Device Crossover CableWhere to Go Next OL-23803-02 Diagnosing Problems Switch Post ResultsBad or Damaged Cable Switch LEDsSwitch Connections Ethernet and Fiber-Optic Cables10/100 PoE or PoE+ Port Connections Interface Settings10/100 and 10/100/1000 Port Connections SFP ModuleSpeed, Duplex, and Autonegotiation Switch PerformanceSpanning Tree Loops Autonegotiation and Network Interface CardsResetting the Switch Finding the Switch Serial NumberSerial Number Location for the Catalyst 3560CPD-8PT-S Switch 330039 OL-23803-02 Technical Specifications Environmental RangesEnvironmental Ranges Physical Specifications Power Requirements Table A-2 Catalyst 3560-C and 2960-C Switch Specifications Switch Available PoEOL-23803-02 Connector Specifications 10/100 and 10/100/1000 PortsSFP Module Connectors Figure B-2 10/100/1000 Port PinoutsCore Modal Wavelength Cables and AdaptersSFP Module Cables Cable Pinouts TP3Device Switch Console RJ-45-to-DB-9 Port DTEConsole Port Adapter Pinouts RxD TxD Switch Console RJ-45-to-DB-25 Port DTE Adapter DeviceTxD RxD Accessing the CLI Through the Console Port RJ-45 Console PortFigure C-1 Connecting the Console Cable Figure C-2 Connecting the USB-Mini Console Cable USB Mini-Type B Console PortInstalling the Cisco Microsoft Windows USB Device Drivers Installing the Cisco Microsoft Windows XP USB DriverInstalling the Cisco Microsoft Windows 2000 USB Driver Uninstalling the Cisco Microsoft Windows USB Drivers Using the Add or Remove Programs UtilityCompleting the Setup Program Entering the Initial Configuration InformationIP Settings Enter a virtual terminal Telnet password, and press Return Enter an enable secret password, and press ReturnEnter an enable password, and press Return Switch or as a standalone switchThese choices appear OL-23803-02