Cisco Systems 10BASE-FL, PA-5EFL= manual Introduction, Contents

Page 1

Text Part Number: 78-3158-04

PA-5EFL Ethernet 10BASE-FL

Port Adapter Installation and

Conﬁguration

Product Numbers: PA-5EFL and PA-5EFL=

Introduction

This conﬁguration note describes the installation and conﬁguration of the Ethernet 10BASE-FL port adapter (PA-5EFL[=]), which can be used in the following platforms:

•Cisco 7200 series routers—which consist of the 2-slot Cisco 7202, 4-slot Cisco 7204 and Cisco 7204VXR, and the 6-slot Cisco 7206 and Cisco 7206VXR

•Cisco uBR7246 universal broadband router

•Second-generation Versatile Interface Processor (VIP2) in all Cisco 7500 series routers and in Cisco 7000 series routers using the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI) installed.

Contents

The following sections are included in this document:

•

•

•

•

•

If You Need More Information, page 2

Port Adapter Installation Prerequisites, page 2

What Is the 5EFL Port Adapter?, page 8

VIP2 and the 5EFL Port Adapter, page 11

Cisco 7200 Series and the 5EFL Port Adapter, page 25

The section “Cisco Connection Online,” on page 38, includes general reference information.

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

Copyright © 1998
Cisco Systems, Inc.	1
All rights reserved.	1

Image 1

Contents Introduction ContentsIf You Need More Information Port Adapter Installation PrerequisitesIf You Need More Information Software and Hardware Requirements Tools and Parts RequiredTools and Parts Required PA-5EFL Port Adapter Software RequirementsSafety Warnings Safety GuidelinesSafety Guidelines Electrical Equipment Guidelines Safety WarningsEthernet and Ethernet 10BASE-FL Overview Telephone Wiring GuidelinesPreventing Electrostatic Discharge Damage Ieee 802.3 10BASE-FL Speciﬁcations Ieee 802.3 10BASE-FL SpecificationsIeee Parameter EthernetWhat Is the 5EFL Port Adapter? What Is the 5EFL Port Adapter?Multimode Optical-Fiber Parameters Parameter MultimodeTwo Port Adapters on a VIP2-50 Horizontal Orientation Shown Port Adapters in the Cisco 5EFL Port Adapter LEDsEthernet 10BASE-FL Fiber-Optic Cable Plug ST Type VIP2 and the 5EFL Port AdapterSram Dram Installing or Replacing a Port Adapter on a VIP2 Installing or Replacing a Port Adapter on a VIP2Screw Aligning a Port Adapter in a Port Adapter Slot VIP2 and the 5EFL Port Adapter Conﬁguring the 5EFL Interfaces Attaching 5EFL Port Adapter Interface CablesAttaching 5EFL Port Adapter Interface Cables VIP2 and the 5EFL Port Adapter Conﬁguring Interfaces Configuring the 5EFL InterfacesChecking the Conﬁguration Using show Commands to Verify the VIP2 StatusStep Router# sh int e 3/0/0 Using show Commands to Display Interface InformationRouter# sh int e 3/1/0 Router# show version Router# show diag Using the ping CommandCisco 7200 Series and the 5EFL Port Adapter Cisco 7200 Series and the 5EFL Port AdapterRemoving a Port Adapter Handling a Port Adapter Guide Replacing a Port AdapterPort adapter Handle Attaching 5EFL Port Adapter Interface Cables Conﬁguring the 5EFL Interfaces 10BASE-FL Interface Port Number Example Using show Commands to Verify the New Interface Status Router# sh int e 2/0 Cisco 7200 Series and the 5EFL Port Adapter StepLast reset from power-on Bridging software FF FF Configuring the 5EFL Interfaces Documentation CD-ROM Cisco Connection OnlineCisco Connection Online Documentation CD-ROM Documentation CD-ROM