Cisco Systems CX-FEIP-2FX=, CX-FEIP-1TX=, CX-FEIP-1FX=, CX-FEIP-2TX= manual Router# show version

Checking the Configuration

The show version (or show hardware) command displays the configuration of the system hardware (the number of each interface processor type installed), the software version, the names and sources of configuration files, and the boot images.

Following is an example of the show version command used with a Cisco 7500 series system:

Router# show version

Cisco Internetwork Operating System Software

IOS (tm) GS Software (RSP-JV-M), Released Version 11.1(10)CA [biff 135] Copyright (c) 1986-1997 by cisco Systems, Inc.

Compiled Mon 10-Mar-97 10:06 by biff

Image text-base: 0x600108A0, data-base: 0x60982000

ROM: System Bootstrap, Version 11.1(2) [biff 2], RELEASE SOFTWARE (fc1)

ROM: GS Bootstrap Software (RSP-BOOT-M), Version 10.3(8), RELEASE SOFTWARE (fc2)

Router uptime is 23 minutes System restarted by reload

System image file is “biff/rsp-jv-mz”, booted via tftp from 223.255.254.254

cisco RSP2 (R4600) processor with 32768K bytes of memory. R4700 processor, Implementation 33, Revision 1.0

Last reset from power-on G.703/E1 software, Version 1.0.

SuperLAT software copyright 1990 by Meridian Technology Corp). Bridging software.

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. TN3270 Emulation software (copyright 1994 by TGV Inc). Chassis Interface.

(additional displayed text omitted from this example)

1 FEIP controller (2 FastEthernet).

2 FastEthernet/IEEE 802.3 interfaces.

(additional displayed text omitted from this example)

123K bytes of non-volatile configuration memory.

8192K bytes of Flash PCMCIA card at slot 0 (Sector size 128K). 8192K bytes of Flash internal SIMM (Sector size 256K).

No slave installed in slot 7. Configuration register is 0x0

Fast Ethernet Interface Processor (FEIP) Installation and Configuration 35