Cisco Systems AS5350XM Cabling Specifications, Console and Auxiliary Port Cables and Pinouts

A P P E N D I X C

Cabling Specifications

This appendix provides the following cabling and pinout information for the Cisco AS5350XM universal gateway:

•Console and Auxiliary Port Cables and Pinouts, page C-1

•Ethernet Port Pinouts, page C-4

•BITS Port Pinouts, page C-5

•Alarm Port Pinouts, page C-5

•Bantam Jack Port Pinouts, page C-5

Note This appendix provides cabling information for chassis connections only. For cabling information for the Cisco AS5350XM dial feature cards, see the Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide.

Note This appendix specifies pinouts only for the pins used. Pins not listed in the tables in this appendix are not connected.

Console and Auxiliary Port Cables and Pinouts

The universal gateway arrives with a console and auxiliary cable kit, which contains the cable and adapters you need to connect a console (an ASCII terminal or PC running terminal emulation software) or modem to your universal gateway. The console and auxiliary cable kit includes:

•RJ-45-to-RJ-45 rollover cable. (See the next section, “Identifying a Rollover Cable,” for more information.)

•RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL).

•RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL).

•RJ-45-to-DB-25 male DCE adapter (labeled MODEM).

For console connections, proceed to the “Console Port Cables and Pinouts” section on page C-2. For modem connections, proceed to the “Auxiliary Port Cables and Pinouts” section on page C-4.

Cisco AS5350XM Universal Gateway Chassis Installation Guide

OL-6417-02 C-1