Cisco Systems AS5350XM manual IN-5

4-10

Index

rear panel illustration (figure)				1-2
rear panel LEDs (figure)		4-1
reconnecting the power cables to the backplane
(figure)	B-10
regulatory compliance		1-5
removing and replacing the SDRAM DIMM (figure)							A-7
removing the air separator (figure)					B-7
removing the chassis cover			A-1,B-2
removing the chassis cover (figure)					A-3
removing the chassis cover screws (figure)						A-3
removing the power supply mounting screws (figure)							B-6
replacing memory components				A-1
replacing SDRAM	A-6
replacing the air separator (figure)					B-11
replacing the chassis cover			A-8,B-11
replacing the chassis cover (figure)					A-9,B-12
replacing the compact flash			A-4
replacing the fan tray 4-5
replacing the power supply, required tools						B-2
required tools, rack-mounting				3-4
required tools, replacing the power supply						B-2
required tools, SDRAM replacement					A-6
rollover cable (figure)		C-2
rollover cable, identifying			C-2

S

Safety
general guidelines		2-1
with electricity	2-1
safety recommendations A-1
screws, loosen fan tray screws (figure)			4-6
SDRAM, replacing		A-6
SDRAM replacement, required tools			A-6
serial interfaces	1-4
serial ports, supported standards 2-5
service and support		4-10
setting up the chassis		3-1
single power supply		3-16

sliding fan tray out of slots (figure)					4-8
slot numbering (figure)			4-3
slot numbering, description				4-2
specifications, cabling		C-1
specifications, Cisco AS5350 (table)					1-4
standard bracket installation (figure)					3-4
standard rack-mount brackets (figure)					3-4
static electricity, caution			B-2
static electricity, preventing				2-2
support, getting technical			4-10
supported standards, serial ports 2-5
Symbols
Caution viii
Note	viii
Timesaver viii
Tips	viii
system board (figure)		A-5

T

T1 card, connections	3-7
Tables
10BASE-T Port Pinouts C-4
Alarm Port Pinouts	C-5

Auxiliary Port Signaling and Cabling using a DB-25

Adapter	C-4
Bantam Jack Port Pinouts C-5
BITS Port Pinouts C-5
Chassis LEDs	4-2
Chassis Specifications		1-4
Console Port Signaling and Cabling Using a DB-25
Adapter	C-3
Console Port Signaling and Cabling using a DB-9
Adapter	C-3
Organization	vii
technical support	4-10
temperature, monitoring		4-2
temperature specification		1-4

tightening fan tray screws (figure)

Cisco AS5350XM Universal Gateway Chassis Installation Guide

OL-6417-02 IN-5