Cisco Systems AS5350XM manual RJ-45-to-DB-9

Appendix C Cabling Specifications

Console and Auxiliary Port Cables and Pinouts

Table C-1	Console Port Signaling and Cabling Using a DB-9 Adapter
				RJ-45-to-DB-9
Console Port (DTE)		RJ-45-to-RJ-45 Rollover Cable		Terminal Adapter	Console Device
Signal		RJ-45 Pin	RJ-45 Pin	DB-9 Pin	Signal
RTS		11	8	8	CTS
DTR		2	7	6	DSR
TxD		3	6	2	RxD
GND		4	5	5	GND
GND		5	4	5	GND
RxD		6	3	3	TxD
DSR		7	2	4	DTR
CTS		81	1	7	RTS

1. Pin 1 is connected internally to pin 8.

Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL) to connect the console port to a terminal. Figure C-3shows how to connect the console port to a terminal. Table C-2lists the pinouts for the asynchronous serial console port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL).

Figure C-3 Connecting the Console Port to a Terminal

Terminal

RJ-45-to-RJ-45

rollover cable

Universal gateway

RJ-45-to-DB-25 adapter (labeled TERMINAL)

37210

Table C-2	Console Port Signaling and Cabling Using a DB-25 Adapter
Console Port				RJ-45-to-DB-25
(DTE)1		RJ-45-to-RJ-45 Rollover Cable		Terminal Adapter	Console Device
Signal		RJ-45 Pin	RJ-45 Pin	DB-25 Pin	Signal
RTS		12	8	5	CTS
DTR		2	7	6	DSR
TxD		3	6	3	RxD
GND		4	5	7	GND
GND		5	4	7	GND
RxD		6	3	2	TxD
DSR		7	2	20	DTR
CTS		81	1	4	RTS

1.You can use the same cabling to connect a console to the auxiliary port.

2.Pin 1 is connected internally to pin 8.

Cisco AS5350XM Universal Gateway Chassis Installation Guide

OL-6417-02 C-3