Cisco Systems AS5350XM manual Power Supply Considerations

Chapter 2 Preparing to Install the Cisco AS5350XM Universal Gateway

Preparing to Connect to a Network

Power Supply Considerations

Check the power at your site to ensure that you are receiving “clean” power (free of spikes and noise). Install a power conditioner if necessary.

Warning The device is designed to work with TN power systems. Statement 19

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). Statement 13

The universal gateway AC power supply includes the following features:

•The full range of operation is—100 to 240 VAC.

•All units include a 6-foot (1.8-m) electrical power cord. (A label near the power inlet indicates the correct voltage, frequency, and current draw for the unit.)

Note The redundant AC power supply has a non-standard connector. Use the electrical power cord that came with your universal gateway.

The universal gateway DC power supply includes the following features:

•150-W output.

•Dual input connections for power source redundancy.

•Removable DC connector. (A label near the power inlets indicates the correct voltage, current draw, and power dissipation for the unit.)

•Double-hole grounding lug for reliable grounding to the chassis.

Cisco AS5350XM Universal Gateway Chassis Installation Guide

2-6 OL-6417-02