Cisco Systems AS5400XM, AS5350XM manual Installing PVDM2 Modules in the Voice Feature Card

A-13

A-12

Contents

		Removing PVDM2 Modules From the Voice Feature Card					6-9
		Installing PVDM2 Modules in the Voice Feature Card 6-10
		Digital Signal Processor Firmware			6-11
		Getting Help	6-11
		Where to Go Next		6-11
		Troubleshooting
C H A P T E R	7		7-1
		LEDs 7-1
		Mixing WAN Feature Cards 7-5
		Mixing Universal Port and Dial-Only Feature Cards				7-6
		Mixing Voice Feature Cards With Universal Port and Dial-Only Feature Cards 7-6
		Monitoring the Chassis Environment			7-7
		Displaying Environment Status			7-8
		Using the Bantam Jack Ports to Monitor T1, E1, and CT3 Feature Cards 7-10
		Using Drop and Insert Mode on the CT3 Feature Card				7-10
		Troubleshooting Network Interfaces			7-11
		Getting Help	7-11
		Cabling Specifications
A P P E N D I X	A			A-1
		2-Port and 4-Port T1 or E1 Feature Card Cable and Port Pinouts					A-1
		8-Port T1 or E1 Feature Card Cable and Port Pinouts				A-6

Attaching the 8-Port T1 or E1 Feature Card Interface Cable to a Bracket (Optional) A-8

CT3 Feature Card Cable and Port Pinouts

Bantam Jack Port Pinouts

I N D E X

Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide

78-17406-01 v