Cisco Systems RVL200 manual RV042 #2 Configuration

Appendix K Configuration of Multiple Subnets

9.Enter 192.168.1.2 in the Default Gateway field.

10.Enter 1 in the Hop Count field.

11.Select WAN1 from the Interface drop-down menu.

12.To create the static route, click Add to list.

13.Click Save Settings.

14.Click the Firewall tab.

15.For the Firewall setting, select Disable.

16.Click Save Settings.

RV042 #2 Configuration

1.Launch the web browser for a computer connected one of the Ethernet ports of the RV042 #2.

2.Access the web-based utility of the RV042 #2. (Refer to the User Guide of the RV042 for details.)

3.Click the Setup tab.

4.Click the More tab.

5.Click the Advanced Routing tab.

6.For the Working Mode setting, select Router.

7.In the Static Routing section, enter 192.168.20.0 in the Destination IP field.

8.Enter 255.255.255.0 in the Subnet Mask field.

9.Enter 192.168.1.20 in the Default Gateway field.

10.Enter 1 in the Hop Count field.

11.Select WAN1 from the Interface drop-down menu.

12.To create the static route, click Add to list.

13.Click Save Settings.

14.Click the Firewall tab.

15.For the Firewall setting, select Disable.

16.Click Save Settings.

4-Port SSL/IPSec VPN Router 93