Cisco Systems RVL200 manual Setup, Dynamic IP, Static IP

Page 27

Chapter 4

Advanced Configuration

DHCP > Setup

Setup

Enable DHCP Server  To use the Router as your network’s DHCP server, select Enable DHCP Server. If you already have a DHCP server on your network, remove the check mark.

Dynamic IP

Client Lease Time  The Client Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased” this dynamic IP address. The range is 5-43,200 minutes. The default is 1440 minutes.

Dynamic IP Range Start/End  Enter a starting IP address and ending IP address to create a range of available IP addresses. The default range is 100-149. Enter a value for the DHCP server to start with when issuing IP addresses. This value must be 192.168.1. 2 or greater, because the default IP address for the Router is 192.168.1.1.

Static IP

You can assign a static IP address to a specific device based on its MAC address.

Show unknown MAC addresses  Click Show unknown MAC addresses to view all devices’ IP addresses and corresponding MAC addresses. The Unknown MAC Address List appears.

Unknown MAC Address List

To add an IP address and MAC address set to the Static IP list, select Enable, and then click Apply. To add all IP addresses and MAC addresses to the Static IP list, click Select All.

To update the on-screen information, click Refresh. To exit this screen and return to the DHCP > Setup screen, click Close.

Static IP Address  Enter the static IP address. You can enter 0.0.0.0 if you want the Router to assign a static IP address to the device.

MAC Address  Enter the MAC address of the device. Name  Enter a descriptive name for the device.

Enable  Select Enable to assign the static IP address to this device.

Click Add to List, and configure as many entries as you would like, up to a maximum of 100. To delete an entry, select it and click Delete selected Entry.

Block MAC address on the list with wrong IP address  To block traffic from devices with MAC addresses on the Static IP list but using the wrong IP addresses, select this option. It prevents users from changing device IP addresses without your permission.

Block MAC address not on the list  To block traffic from devices using dynamic IP addresses, select this option. It blocks all devices with MAC addresses not listed on the Static IP list.

DNS

DNS Server  You can assign DNS server(s) to the DHCP clients so the Router will use the DNS server(s) for faster access to functioning DNS server(s). Enter the IP address of at least one DNS server.

WINS

WINS Server  Windows Internet Naming Service (WINS) is a service that resolves NetBIOS names to IP addresses. WINS is assigned if the computer (DHCP client) requests one. If you do not know the IP address of the WINS server, keep the default, 0.0.0.0.

4-Port SSL/IPSec VPN Router

19

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Port SSL/IPSec VPN Router About This Guide About This GuideTable of Contents Ddns IPSec VPN Gateway to Gateway Appendix C Bandwidth Management Appendix D Active Directory ServerAppendix E User for the Active Directory Server Appendix I Gateway-to-Gateway VPN Tunnel Appendix J IPSec NAT TraversalAppendix L Multiple VLANs with Computers Appendix M Multiple VLANs and Subnets Appendix O Firmware UpgradeAppendix P Battery Replacement Appendix Q SpecificationsIntroduction to the Router ChapterChapter Introduction IntroductionComputer using SSL VPN client software to VPN Router Back Panel Chapter Product OverviewProduct Overview Front PanelChapter Installation InstallationPhysical Installation Cable Connection Before You Begin Chapter Advanced ConfigurationAdvanced Configuration OverviewClick Security Select Use SSL 2.0 and Use SSL How to Access the Web-Based UtilitySystem Information System SummarySSL VPN Setting Status Network Setting StatusFirewall Setting Status IPSec VPN Setting StatusWAN Connection Type Setup Tab NetworkLAN Setting NetworkPPPoE Point-to-Point Protocol over Ethernet Static IPPptp Point-to-Point Tunneling Protocol Setup PasswordTime Setup TimeSetup DMZ Host PasswordPort Triggering Setup Tab ForwardingForwarding Port Range ForwardingUPnP Setup UPnPSetup One-to-One NAT Setup MAC CloneOne-to-One NAT Advanced Routing Setup DdnsSetup Advanced Routing MAC CloneStatic Routing Dhcp SetupSetup Dynamic IPStatic IP Multiple VLANs Dhcp StatusStatus Dhcp Multiple VLANsInter-VLAN Routing System Management DiagnosticDiagnostic Dhcp Inter-VLAN RoutingFirmware Download Factory DefaultFirmware Upgrade System Management RestartRestart Import Configuration FileExport Configuration File System Management Port MirroringPort Status Port Management Port SetupBasic Per Port Config Port Management Port StatusCreate Vlan Port Management Port SettingPort Setting Port Management Create VlanQoS Bandwidth Management Vlan MembershipBandwidth Management Priority Rate ControlTrust Mode Default CoS QoS QoS SetupQoS Setup QoS ModeCoS Settings QoS Queue SettingsQoS Dscp Settings Queue SettingsDscp to Queue Dscp SettingsFirewall General GeneralFirewall Access Rules Access RulesRestrict WEB Features Services Add a New Access RuleIP/MAC Group Firewall Content FilterContent Filter SchedulingIP Address IPSec VPN SummaryForbidden Domains Website Blocking by KeywordsAdd a New Tunnel Local Group SetupIPSec VPN Gateway to Gateway SummaryRemote Group Setup Local Security Group TypeRemote Security Gateway Type Remote Security Group Type IKE with Preshared Key IPSec SetupAdvanced VPN Pass Through IPSec VPN VPN Pass ThroughSSL VPN Summary SSL VPN Certificate ManagementEdit Group Authentication TypeSSL VPN User Management User ManagementEdit User SSL VPN Virtual PassageSnmp Global Parameters Virtual PassageGlobal Parameters Group Profile Snmp ViewsSnmp Group Profile ViewsCommunities Snmp Group MembershipSnmp Communities Group MembershipNotification Recipient Snmp Notification RecipientSystem Log Log System LogGeneral Log Log SettingLog System Statistics Alert LogWizard Basic SetupPPPoE Obtain an IP automaticallyAccess Rule Setup Select the Service Linksys Web Site SupportLogout ManualLogout Appendix a Troubleshooting TroubleshootingAppendix a Appendix B Appendix B Virtual Passage SSL VPN ClientBefore You Begin Windows OS Click Trusted sites Make the SSL VPN Portal a Trusted Site Windows OSLogin for the SSL VPN Portal Windows OS Installation of the Virtual Passage Client Windows OSClick Continue Anyway When you right-click the icon, you have three optionsInstallation of the Virtual Passage Client Mac OS Login for the SSL VPN Portal Mac OSWindows Vista Usage Click Continue Removal of the Virtual Passage Client Mac OSInstallation of the Virtual Passage Client Linux OS Login for the SSL VPN Portal Linux OSBefore You Begin Linux OS Removal of the Virtual Passage Client Linux OS Bandwidth Management Creation of New ServicesAppendix C Appendix C Bandwidth ManagementCreation of New Bandwidth Management Rules Click Save SettingsAppendix D Appendix D Active Directory ServerActive Directory Server Select Domain in a new forest, and then click Next Enter a domain name, and then click Next Active Directory Server Troubleshooting Appendix E User for the Active Directory Server Appendix EUser for the Active Directory Server Appendix F Appendix F Internet Authentication Service IAS ServerInternet Authentication Service IAS Server Select Unencrypted authentication. Click Apply Click Finish Welcome to the New Connection Request Policy Wizard Click Edit Profile Click the User Management tab Appendix GLAN-to-LAN Connection Select HTTPSTCP/443~443 from the Service drop- down menuAppendix H Appendix H Deployment in an Existing NetworkWAN-to-LAN Connection Click the Gateway to Gateway tab Configuration of the RVL200Appendix Appendix Gateway-to-Gateway VPN TunnelConfiguration of PC 1 and PC Configuration of the RV082RV082 RVL200 Dynamic IP B.B.B.B with Configuration when Both Gateways Use Dynamic IP Addresses Appendix Appendix J IPSec NAT Traversal Configuration of ScenarioConfiguration of Router a Appendix JIPSec NAT Traversal Configuration of Router BOne-to-One NAT Rule on NAT 1 RV042 One-to-One NAT Rule on NAT 2 RV042Configuration of Router a Appendix K Configuration of MultipleRVL200-to-RV042 Configuration Appendix KRV042 #1 Configuration Click Save SettingClick the Advanced Routing tab RV042 #2 Configuration Click the Port Management tab RVL200-to-SRW2048 ConfigurationAppendix L Appendix L Multiple VLANs with ComputersSRW2048 Configuration Select Enable VlanClick Save Settings Click the Vlan Membership tab Multiple VLANs RVL200 ConfigurationAppendix M Appendix MClick the Inter-VLAN Routing tab Inter-VLAN Routing OptionOver a SSL VPN Tunnel Access of Multiple VLANsAppendix N Appendix NAppendix O Firmware Upgrade Firmware UpgradeAppendix O Click the Firmware Upgrade tab Upgrade the FirmwareAppendix P Appendix P Battery ReplacementBattery Replacement Replace the Lithium BatteryAppendix Q Specifications SpecificationsAppendix Q Warranty Information Limited WarrantyAppendix R Regulatory Information Appendix SDansk Danish Miljøinformation for kunder i EU Port SSL/IPSec VPN Router 106 Norsk Norwegian Miljøinformasjon for kunder i EU Port SSL/IPSec VPN Router 108 Contact Information Appendix T
Top Page Image Contents