
Chapter 4 | Advanced Configuration |
4.Depending on which connection type you have selected, the appropriate screen will appear. Follow the instructions for the appropriate connection type:
Obtain an IP automatically
If you want to use the ISP’s DNS server, select Use DNS Server provided by ISP (default). If you want to designate a specific DNS server IP address, select Use the Following DNS Server Addresses, and enter the DNS server IP addresses you want to use (you must enter at least one).
Click Next to continue, and proceed to step 5. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the Setup Wizard.
Obtain an IP Automatically
Static IP
Complete the Static IP, Subnet Mask, and Default Gateway fields with the settings provided by your ISP. Click Next to continue.
Click Previous if you want to return to the previous screen. Click Exit if you want to exit the Setup Wizard.
Static IP
On the DNS Servers screen, enter the DNS server IP addresses you want to use (you must enter at least one).
Click Next to continue, and proceed to step 5. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the Setup Wizard.
DNS Servers
PPPoE
Complete the User Name and Password fields with the information provided by your ISP.
Click Next to continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the Setup Wizard.
PPPoE
Select Connect on demand or Keep alive. If you select the Connect on demand option, the connection will be disconnected after a specified period of inactivity (Max Idle Time). If you have been disconnected due to inactivity, Connect on Demand enables the Router to automatically
50 |