Cisco Systems 2600 manual Right

Chapter 3 Installing the Router

Setting Up the Chassis

Figure 3-3 Brackets for 19-Inch Rack-Mounting of Routers with 2-RU Height

LEFT	Slots for	RIGHT
	cable tie
	attachment
Narrow bracket for		Wide bracket for
chassis side opposite fans		chassis side with fans

72283

Figure 3-4 Brackets for 23-Inch Rack-Mounting of Routers with 2-RU Height

23" ETSI, NEBS LEFT

For chassis side

opposite fans

Slots for	NEBSETSI,	RIGHT
cable tie
attachment
	23"

For chassis side

with fans

82532

Attaching the Brackets to Cisco 261x, Cisco 262x, Cisco 26xxXM, and Cisco 265x Series Routers

To install the chassis in a rack, attach the brackets in one of the following ways:

•With the front panel forward (see Figure 3-5and Figure 3-6)

•With the rear panel forward (see Figure 3-7and Figure 3-8)

•In a center-mount rack, with the rear panel forward (see Figure 3-9through Figure 3-11)

Note Use the screws that came with your router package for attaching the brackets.

Note If you are installing a Cisco 2600 series router in a 19-inch rack with a 17.5-inch opening, orient the rack-mount brackets so that, when installed, they do not increase the width of the chassis. (See Figure 3-5.)

If you are installing a Cisco 2600 series router in a 19-inch rack with a 17.75-inch opening or a 23- or 24-inch rack, orient the rack-mount brackets so that, when installed, they increase the width of the chassis. (See Figure 3-6.)

Cisco 2600 Series Routers Hardware Installation Guide

OL-2171-06 3-5