Cisco Systems 2600 To proceed with manual configuration using the CLI, enter no

Chapter 3 Installing the Router

Configuring the Router

Would you like to enter the initial configuration dialog? [yes/no]:

Note If these messages do not appear, SDM and a default configuration file have been installed on the router at the factory. To use SDM to configure the router, refer to the quick start guide that shipped with your router. You can also access the Cisco2600 series routers quick start guides online at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/26xx_qsg/index.htm

Note To avoid losing work you have completed, be sure to save your configuration occasionally as you proceed. Use the copy running-configstartup-configcommand to save the configuration to NVRAM.

Step 1 To proceed with manual configuration using the CLI, enter no:

Would you like to enter the initial configuration dialog? [yes/no]: no

Step 2 Press Return to terminate autoinstall and continue with manual configuration:

Would you like to terminate autoinstall? [yes] Return

Several messages are displayed, ending with a line similar to the following:

...

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled <date> <time> by <person>

Step 3 Press Return to bring up the Router> prompt:

...

flashfs[4]: Initialization complete. Router>

Step 4 Enter privileged EXEC mode:

Router> enable

Router#

For configuration using the CLI, refer to the Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers. or the Cisco IOS software configuration documentation. You can access these documents on Cisco.com and on the Documentation CD-ROM.

Cisco 2600 Series Routers Hardware Installation Guide