LOCAL MANAGEMENT
3.Select Yes to Clear SNMP Agent IP Address and Community Names Only or No to escape the field.
4.Use the arrow keys to highlight the SAVE command.
5.Press Return. The “SAVED” message appears on the screen indicating that your changes have been saved to memory.
Setting the Clear All NVRAM Field
To set the Clear All NVRAM field:
1.Use the arrow keys to highlight the Clear All NVRAM field.
2.Press Return to toggle from Yes to No.
3.Select Yes to clear NVRAM or No to escape the field.
4.Use the arrow keys to highlight the SAVE command.
5.Press Return. The “SAVED” message appears on the screen indicating that your changes have been saved to memory.
Setting the Enable Beacon Recovery Field
To set the Enable Beacon Recovery field:
1.Use the arrow keys to highlight the Enable Beacon Recovery field.
2.Press Return to toggle from Yes to No.
3.Select Yes to enable Beacon Recovery or No to escape the field.
4.Use the arrow keys to highlight the SAVE command.
5.Press Return. The “SAVED” message appears on the screen indicating that your changes have been saved to memory.
Page