LOCAL MANAGEMENT
Walking Through OIDs
To walk through an OID:
1.Highlight Walk, using the arrow keys, then press the Return key. “<INITIAL> OID (=F9)” appears.
2.Enter the OID (minus the prepend) and press the Return key. The screen will begin walking through the sublayers of the MIB available from the specified OID. Each OID listed displays the specified OID, its size, its type, and the data it contains.
3.Press the Space Bar to stop the walk, or wait for “***MIB WALK COMPLETED***” to appear on the screen.
Stepping Through OIDs
To step through an OID (you can step through only after a GetNext):
1.Highlight Step, using the arrow keys, then press the Return key. “Specify OID” appears.
2.Enter the OID (only the suffix is necessary) and press Return. The Tools screen will begin to scroll one OID at a time, through all of the sublayers of the MIB available for that OID.
Cycling Through OIDs
To cycle through an OID:
1.Use the arrow keys to Highlight CYCLES, then press Return.
2.Enter the number of cycles that you want to occur after “ENTER CYCLE COUNT:”, then press the Return key.
3.Enter how many seconds delay that you want between get next requests after “ENTER CYCLE DELAY (secs):”, then press the Return key.
Page