Yamaha RX-SL100RDS Changing parameter settings, Press AMP, then press SET MENU to enter SET MENU

Changing parameter settings

You can enjoy good quality sound with the factory-set parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room.

Use the remote control to access and adjust each parameter.

	b	p		a
	TITLE			MENU	1
	LEVEL			SET MENU
	CH	ENTER		CH	2,3
	–			+
	RETURN			DISPLAY
	TEST
	TV VOL			VOLUME
		MUTE
1		AMP
	DVD/CD	VCR		VIDEO 1
	DTV/CBL	TUNER		VIDEO 2
	MUTE	INPUT	–	+
				CH
		TV MODE

RX-SL100RDS

SET MENU

The number of levels each menu contains may differ. If the menu you selected contains a sub menu, press hto enter the desired sub menu.

3Press ENTER, then press k/n/l / h repeatedly to change the setting for the item you want to adjust.

4To exit, press SET MENU, or just press one of the sound field program group buttons.

	HALL	JAZZ	ROCK	ENTERTAIN
	1	2	3	4
MENU
or	MUSIC	TV THTR	MOVIE 1	MOVIE 2
SET MENU	5	6	7	8
	q/DTS
	9

1Press AMP, then press SET MENU to enter

SET MENU.

AMP MENU

then

SET MENU

“Set Menu” is displayed on both the monitor and front panel of this unit.

The explanations in this document are based on the GUI. The characters shown in the front panel display may differ from those on the GUI.

2Press k/n repeatedly to select a menu, then press h.

Note

You cannot change parameter values when Memory Guard is set to “ON”. If you want to change the parameter values, set Memory Guard to “OFF” (see page 45).

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the parameter values will return to the factory settings. If this happens, edit the parameter value again.

ENTER

ENTER

English

39