Yamaha RX-SL100RDS Connections, Before connecting components, Connecting other components

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the mains power until all connections between components are complete.

•Make sure that all connections are made correctly - that is to say, L (left) to L, R (right) to R, “+” to “+” and “–”

to “–”. Some components require different connection methods and have different jack names. Refer to the operating instructions for each component you wish to connect to this unit.

•After you have completed all connections, check them again to make sure they are correct.

•The jack names correspond to the names on the input selector.

Connecting other components

■Connecting a TV

Connect one end of the SCART cable to the TV/IN OUT connector on this unit and the other end to the SCART connector on your TV.

■Connecting AV components

Connect one end of the SCART cable to the EXT. IN/OUT connector on this unit and the other end to the SCART connector on your AV component. You can also daisy chain several SCART components together as shown in “Digital audio connections” (page 13).

AV component

(DVD player, cable tuner, etc.)

TV

AM ANT GND	FM ANT	EXT. IN/OUT	TV IN/OUT
TUNER	75Ω UNBAL
OPTICAL		COAXIAL
DIGITAL
INPUT			OUTPUT
1DVD/CD	2/CBLDTV	3VIDEO 1	SUBWOOFER

SPEAKERS	FRONT	CENTER	SURROUND		SURR BACK
R	L		R	L
+					+
–					–

MAINS

Note

Use a SCART cable to make the above connections. The SCART cable, or “Euro AV cable”, supports IN/OUT signal transmission, providing you with the best possible picture and sound.

12