Yamaha RX-SL100RDS owner manual SET Menu, Basic menu, Sound menu, Input menu, Option menu

SET MENU

You can use the following parameters to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

■BASIC menu

Use to quickly setup basic system parameters (see page 16).

■SOUND menu

Use to manually adjust any speaker setting.

y

Most of the parameters described in the SOUND menu are set automatically when you perform the BASIC settings (see page 16).

Item	Features	Page
Center SP. GEQ	Adjusts the frequency.	40
SP Tone Control	Adjusts the tonal balance of the speakers.	40
HP Tone Control	Adjusts the tonal balance of the headphones.	40
Speaker Set	Selects the output mode suitable for each speaker, the speakers for low-frequency signal output,	41
	and the cross over frequency.
SP Distance	Adjusts the delay time of each speaker.	42
LFE Level	Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.	42
Dynamic Range	Adjusts the dynamic range for Dolby Digital or DTS signals.	42

■INPUT menu

Use to reassign digital input/outputs or select the input mode.

Item	Features	Page
Input Assign	Assigns jacks according to the component to be used.	43
Input Mode	Selects the initial input mode of the source.	44

■OPTION menu

Use to adjust the optional system settings.

Item	Features	Page
Display Dimmer	Adjusts the overall brightness of the front panel display.	45
Memory Guard	Locks sound field program parameters and other SET MENU settings.	45
Audio Mute	Adjusts the muting level for audio sources.	45
TUNER Freq/Step	Switches frequency spacing.*a	45
Standby SCART	Turns on this unit when a component connected using a SCART cable is turned on.*b	45

*a: TUNER Freq/Step is only available for Asia and General models.

*b: Standby SCART is only available for the Europe model.

38