Yamaha RX-SL100RDS Display Dimmer Display dimmer, Memory Guard Memory guard, Audio Mute Mute

■Display Dimmer (Display dimmer)

OPTION menu > Display Dimmer >

Display Dimmer 0

Memory Guard

Audio Mute

DIMMER (Dimmer)

Use to adjust the brightness of the front panel display. Choices: –4 to 0

■Memory Guard (Memory guard)

Use this feature to prevent accidental changes to DSP program parameter values and other system settings. OPTION menu > Memory Guard

Display Dimmer
Memory Guard	OFF
Audio Mute	ON
TUNER Freq/Step

Choices: OFF, ON

Select ON to protect:

•DSP program parameters

•All SET MENU items

•All speaker levels

When Memory Guard is set to ON, you cannot use the test tone or select any other SET MENU items.

■Audio Mute (Mute)

Use this feature to adjust how much the mute function reduces the output volume.

OPTION menu > Audio Mute

Display Dimmer	–20 dB
Memory Guard	–50 dB
Audio Mute	–∞dB
TUNER Freq/Step
Standby SCART

Choices: –20 dB, –50 dB, –mdB

•Select –20 dB to reduce the current volume by 20 dB.

•Select –50 dB to reduce the current volume by 50 dB.

•Select –mdB to completely halt all output of sound.

SET MENU

■TUNER Freq/Step (Tuner frequency step)

Use this feature to adjust the frequency spacing for the tuner. The new setting becomes active the next time the power is turned on.

OPTION menu > TUNER Freq/Step

Memory Guard
Audio Mute
TUNER Freq/Step	AM:9kHz, FM:50kHz
Standby SCART	AM:10kHz, FM:100kHz

Choices: AM: 9kHz, FM: 50kHz and AM: 10kHz,

FM: 100kHz

•Select AM: 9kHz, FM: 50kHz to set the AM band to 9kHz and the FM band to 50kHz.

•Select AM: 10kHz, FM: 100kHz to set the AM band to 10kHz and the FM band to 100kHz.

Note

This feature is only available when using Asia and General models.

■Standby SCART (Standby SCART)

Use this feature to select whether you want signals carried via SCART connections to pass through this unit when it is set to the standby mode.

OPTION menu > Standby SCART

Audio Mute
TUNER Freq/Step
Standby SCART	ON
	OFF
Choices: ON, OFF		ADVANCED OPERATION
• Select ON if you want to allow signals to pass through
this unit when it is in standby mode. (For example, if
this unit is connected via its SCART connectors
between your TV and VCR, the TV signals can pass
through to the VCR even when this unit is in the
standby mode.)
• Select OFF if you do not want signals to pass through
this unit when it is in standby mode.

English

45