Cabletron Systems 6A000 manual Starting SmartSwitch ATM Administrator the First Time

SmartSwitch ATM Administrator Switch Installation and Setup

s• If you are using diskettes, make backup copies of the SmartSwitch ATM Administrator diskettes. Put the original diskettes in a safe place; use them if your backup copies become unusable. Use your backup copies to complete the installation procedure.

¢• Load Disk 1 into drive a or note the network <path> to the directory that contains the SmartSwitch ATM Administrator files.

••Start the installation software:

†NT 4.0 or Win95, click Start then click Run

†NT 3.5.1, select the File menu and click Run

T• Enter a:\setup.exe to install from drive a:

OR <path>\Disk1\setup.exe to install from the network

Q• The Software License Agreement dialog box appears. Follow the instructions on the screen and click Yes to proceed.

–•The Welcome dialog box appears. Read the instructions and click Next to proceed.

••The Choose Destination Location screen appears. Follow the instructions on the screen and click Next. Setup performs the following tasks:

†Copies several files to c:\ZXAdmin or to the destination you specified

†Creates a program group called SmartCell ZX Network Management Tools (Common)

†Creates icons in the group:

SmartSwitch ATM Administrator – starts the application Online Help – starts the online help

Readme – displays release notes

UnInstall SmartSwitch ATM Administrator – removes the application from your PC

G• The Setup Complete dialog box appears. Read the message and click Finish. n• The Information dialog box appears. Click OK.

2.6.2Starting SmartSwitch ATM Administrator the First Time

When you use SmartSwitch ATM Administrator for the first time, you should change the default passwords to prevent unauthorized access to the application. The application arrives with two user accounts set up, as described in Table 2-4.

Table 2-4 Default accounts and passwords

User Name	Access Level	Default Password
admin	Administrator	admin
guest	Guest	guest

s• In the SmartCell ZX Network Management Tools (Common) program group, double click on the icon labeled SmartSwitch ATM Administrator. The SmartSwitch ATM Administrator Login dialog box appears.

2-14 SmartCell 6A000 User Guide