IP ROUTING NETWORK WITH PPP DEVICES
Configure SITE1
The screen interaction will resemble the following:
1)LAN
2)WAN
3)WAN (Direct Host)
4)WAN (RLAN)
5)WAN (UnNumbered)
Select function from above or <RET> for previous menu: 1
INTERFACE NAME or <RET> to cancel? LAN1
Enter the IP Address in dotted decimal notation or <RET> to cancel? 128.1.1.1
Enter the number of significant bits for the Subnet Mask [default = 16]? <RET>
Enter the packet encapsulation type 1) for ETHERNET 2) for SNAP [default = ETHERNET]? <RET>
Enter the MTU size in bytes [default = 1500]? <RET>
Transmit Broadcast Address:
1)128.1.255.255
2)128.1.0.0
3)255.255.255.255
4)0.0.0.0
5)Specify Explicitly
Enter a Transmit Broadcast Address [default = 1]: 1
RIP Send Control:
1)Do Not Send.
2)RIP Version 1.
3)RIP Version 1 Compatibility.
4)RIP Version 2.
Enter a RIP Send Control [default = 2]: <RET>
RIP Receive Control:
1)Do Not Receive.
2)RIP Version 1 Only.
3)RIP Version 2 Only.
4)RIP Version 1 or Version 2.
Enter a RIP Receive Control [default = 4]: <RET>
RIP Respond Control:
1)Do Not Respond.
2)RIP Version 1 Only.
3)RIP Version 2 Only.
4)RIP Version 1 or Version 2.
Enter a RIP Respond Control [default = 4]: <RET>
RIP Version 2 Authentication Control:
1)No Authentication.
2)Simple Password.
Enter a RIP Authentication Control [default = 1]: <RET>
After you have entered all of the information for the interface, a summary screen will be displayed. If all of the configured information is accurate, follow the onscreen prompt to save the information.
Workgroup Remote Access Switch 67