Cabletron Systems 1000, 1200 manual Add a LAN Interface

Page 88

EXAMPLE NETWORKS

2.Select IPX Routing.

3.Enable IPX Routing. Press any key to display the complete IPX routing menu:

IPX Menu:

1)IPX Routing (Enable/Disable)

2)IPX Internal Network Number

3)IPX Interfaces

4)Routing Protocols(Enable/Disable)

5)IPX Static Routes

6)NetWare Static Services

7)IPX Spoofing

8)Type 20 Protocol

9)Isolated Mode (Enable/Disable)

10)Triggered RIP/SAP

Select function from above or <RET> for previous menu:

DEFINE AN INTERNAL NETWORK NUMBER

1.From the IPX menu, select IPX Internal Network Number.

2.Enter the Network Number as prompted. For our example, we will assign the Detroit IPX router masternet a unique internal network number of 111abc.

IPX INTERFACE INFORMATION

In our example, we have three interfaces:

the LAN interface, which represents the CyberSWITCH connection to the LAN IPX Network 0100

the Remote LAN interface for connecting to the bridges at Tampa and Orlando

the traditional WAN interface for connecting to the router at Dallas

CyberSWITCH systems do not require you to configure traditional WAN interfaces for IPX routing, so no additional interface configuration is needed for the Dallas network. However, you must configure both the LAN interface and the Remote LAN interface (for access to Tampa and Orlando). The configurations of both of these interfaces are described in the following sections.

Add a LAN Interface

First we will add the LAN interface. From the IPX Menu, select IPX Interfaces. Select Add. Select LAN as the type of interface.

The interface name is a symbolic name given to the interface. For the LAN interface, you should use a name that describes the LAN. Enter detroitlan for this example.

You will then be asked for the IPX external network number for the LAN interface. Enter 0100.

For the rest of the prompts, press <RET> to accept the default values (including the default values for the LAN RIP information).

88 CyberSWITCH

Image 88
Contents Example Networks Virus Disclaimer Trademarks DOC Notice Contents IP Routing Network with PPP Devices Index Example Networks Simple Remote Bridging Network Resources LinesBridging and Routing Information IP RoutingConfigure the Cyberswitch Line Type = Brisdn Pointtopoint Pointmultipoint Isdn Save Configuration Files Verify the Installation Remote Bridging Network with Security Isdn BRI Device Information Calling ISDN, FR, etc. InformationPat Smith IP Routing Enabled Disabled Mode of Operation Router Configuring the Options Configuring the SecurityConfiguring the Security Level Enabled PPP Verify the Installation IP Routing Network Site System Details Rick Jill Ralph Todd SanFran Configuring the Cyberswitch Options SnmpConfiguring the IP Interface Information WAN Rlan LAN WAN Device Name? Rick Bear Device Authentication Menu Device = Rick Bear Return to the Security Configuration Menu Verify the Installation IP Routing Network with Remote Bridge Devices Business AssumptionsIsdn Resources 123123123123 Carmel CorpOffice ENABLE/DISABLE Bridging Example Networks WAN Rlan Return to the Main Menu Device Name? Monterey Device Table Menu Device = Monterey 198.12.10.0 Save Configuration Files IP Routing Network with PPP Devices IP Routing Network with PPP Devices BRI 5ESS For Site BridgingLAN2 For Site 918105551234 Configure SITE1 Configuring the System OptionsConfiguring the IP Interface Information Screen interaction will resemble the following Device Name? SITE2 Device Table Menu Device = SITE2 Base Data Rate 64000 bps Initial Maximum 384000 bps Configuring Static Routes SITE1 needs default route to SITE2 CSX1200 Host #2 Finishing the Security Configuration Configure SITE2 Configuring SITE2 OptionsConfiguring Security Example Networks IPX Routing Network Masternet Ethernet-1 64000 bps 128000 bps Obpswd Bridging and Routing Information IPX Routing Configure Devices ADD IPX WAN DeviceAuthentication Information Configure System Options Add a LAN Interface Add a Remote LAN Interface Finally, you’ll see this screen IPX Static Routes Save Configuration Files Appletalk Routing Network Isdn SITE1 Appletalk Routing AppleTalk Routing/Port InformationPPP Configure the Cyberswitch Configuring Appletalk Port Information Example Networks Configuring Device Information Disabled Again, return to the Device Table Menu Configuring AN Appletalk Static Route Verify the Installation Index