Cabletron Systems 1000, 1200 manual Finally, you’ll see this screen

EXAMPLE NETWORKS

SAP Send Control:

1)Do Not Send.

2)Send.

Enter a SAP Send Control from the above menu [default = 2]? 1

SAP Receive Control:

1)Do Not Receive.

2)Send.

Enter a SAP Receive Control from the above menu [default = 2]? 2

SAP Respond Control:

1)Do Not Respond.

2)Send.

Enter a SAP Respond Control from the above menu [default = 2]? 2

Finally, you’ll see this screen:

Current Configuration for INTERFACE “remotelan”:

Interface Type		WAN (Remote LAN)
IPX	Network Number	0128
MTU	(bytes)	1497
Encapsulation		Ethernet 802.2

RIP Configuration:
Send Control	Do Not Send
Send Frequency	60 seconds
Receive Control	Receive
RIP entry aging time	180 seconds
Respond Control	Respond
SAP Configuration:
Send Control	Do Not Send
Send Frequency	60 seconds
Receive Control	Receive
SAP entry aging time	180 seconds
Respond Control	Respond

Are you sure you want to add the INTERFACE "remotelan" (Y or N) ? <Y>

When you’ve completed the configuration of both interfaces, you’ll see a summary screen similar to the following:

IPX INTERFACE Menu:
id	Name	Type		Address
1	detroitlan	LAN		0100
2	remotelan	WAN (Remote LAN)		0128
(1) Add, (2) Change,		(3) Delete, (4) Display an INTERFACE
or <RET> for previous menu:			<RET>

90 CyberSWITCH