Extron electronic IPL T S Series manual X4%,X7,X4&SM WX4%%2CX7%2CX4&SM, X1$ ,X1% ,X7# ,X7$ CM

IPL T S Series • Communication and Control 4-11

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to unit)	(host to unit)	(unit to host)
Send e-mail (using	E X4%,X7),X4&SM}	WX4%%2CX7)%2CX4&SM	EmlX4% ]	X7) = The number to insert into an e‑mail
				____
				server-side include “<!--#echo var =
				“WCR” -->” (the E} command with
				no parameters.) The numeral is a 16-bit
				number to be employed as the user defines.
				This is an optional parameter. Use 0 as a
				placeholder if the optional X4& variable is
				used but X7) is not needed.
				X4& = xxx, where xxx = a number 1 to 999
				corresponding to the e-mail’s filename (xxx.
				eml). If xxx = 0 or no parameter is given, the
				IPL T S unit sends the file that was set via the
				CR command.

NIf file X4&.eml is not found when the SM command is executed, the MLC sends a default e-mail message.

Set e-mail server IP	E X1$,X1%,X7#,X7$ CM}	W X1$%2C X1% %2C X7# %2C X7$		X1$ = IP address (xxx.xxx.xxx.xxx). Leading
			Ipm•X1$,X1%,X7#,X7$ ]
address and user		%2C CM		zeros are optional in setting values. Leading
domain name24				zeros are suppressed in returned values.
				X1% = E-mail domain name, e.g., extron.com
				X7# = An e-mail account username (for
				SMTP authentication) of up to 31 characters.
				Do not use commas. This parameter is
				optional during setup.
				X7$ = An e-mail account password (for
				SMTP authentication) of up to 31 characters.
				Do not use commas. This parameter is
				optional during setup. In a response,
				instead of the actual password, X7$ is
				displayed as 4 asterisks (****) if a password
				has been set up or as nothing (      ) if it has
				not.

Mail server setup

Set mail server IP, unit	E X1&,X1%CM]	WX1$%2CX1%CM	Ipm•X1$,X1%]
domain name24
View mail server IP,	ECM}	WCM	X1$,X1%]
unit domain name

different file)

24

message if a

.

eml file has an embedded