Extron electronic IPL T S Series manual X5,X5#,X2, X6 TC, Series Communication and Control

4-8 IPL T

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to unit)	(host to unit)	(unit to host)

View pass-thru	E X!CD}	WX!CD	X5),X5#,X2!]
mode24

S Series • Communication and Control

Ethernet data port

Set current connection E0*X6(TC} port timeout

View current	E0TC}
connection port
timeout
Set global IP port	E1*X6(TC}
timeout

View global IP port	E1TC}
timeout

W0%2AX6(TC	Pti0*X6(]	The current port timeout period applies
		to the currently open Telnet session only.
		When you start another Telnet session, it
		uses the default global port timeout period.
		X6( = timeout period in seconds. See
		the description above. This variable is
		applicable only when the IPL T S unit is
		connected via Ethernet. If the IPL T S device
		is connected via RS-232 protocol, only the
		global timeout commands apply, and any
		commands involving X6( return the E13
		error response.
W0TC	X6(]
W1%2A X6(TC	Pti1*X6(]	The global port timeout is the default
		timeout period for all Telnet sessions.
		X6( = IP connection timeout period
		in seconds. Each step is specified
		in 10-second intervals (1 - 65000,
		default = 30 = 300 seconds). If no data is
		received during the specified period, the
		Ethernet connection closes. Responses are
		returned with leading zeros.
		This timeout period is applicable only
		when the IPL T S unit is connected via
		Ethernet, and you must be logged in as an
		administrator to change this setting.
W1TC	X6(]

Communication and Control, cont’d