Extron electronic IPL T S Series X1@CN, X1#CT, X3$CX, IpxX3$, E0 DH, X1$ CI, X1 CS, X1$ CG

4-12 IPL T S Series • Communication and Control

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to unit)	(host to unit)	(unit to host)
Web browser-specific
Read response from	EUB}	WUB	response from command]
last URL command
IP setup commands
Set unit name24	E X1@CN}	WX1@CN	Ipn•X1@]
Set unit name to	E•CN}	W%20CN	Ipn•X4(]
factory default24
View unit name	ECN}	WCN	X1@]
Set date/time24	E X1#CT}	WX1#CT	Ipt•X1#]
View date/time	ECT}	WCT	X1#]
Set GMT offset	E X#CZ}	WX#CZ	IpzX#]
View GMT offset	ECZ}	WCZ	X#]
Set daylight savings	E X3$CX}	WX3$CX	IpxX3$]
time24
View daylight savings	ECX}	WCX	X3$]
time
Set DHCP on24	E1DH}	W1DH	Idh1]
Set DHCP off24	E0 DH}	W0DH	Idh0]

NChanging DHCP from on to off also resets the IP address to the factory default (192.168.254.254).

View DHCP mode	E DH}	WDH	X% ]	X% = 0 (off) or 1 (on).
Set IP address24	E X1$ CI}	W X1$ CI	Ipi• X1$ ]	X1$ = IP address (xxx.xxx.xxx.xxx). Leading
				zeros in each of the four fields are optional
				in setting values.
View IP address	E CI}	W CI	X1$ ]	Leading zeros in each of the four fields are
				suppressed in returned values.
View hardware	E CH}	WCH	X1* ]	X1* = hardware (MAC) address (xx-xx-xx-
address (MAC)			or Iph•X1* ]	xx-xx-xx).
Set subnet mask24	E X1( CS}	W X1( CS	Ips• X1( ]	X1( = subnet mask (xxx.xxx.xxx.xxx).
				Syntax is the same as for IP addresses.
				Leading zeros are optional in setting values.
View subnet mask	E CS}	WCS	X1(]	Leading zeros are suppressed.
Set gateway IP	E X1$ CG}	W X1$ CG	Ipg• X1$ ]	X1$  = IP address (xxx.xxx.xxx.xxx).
address24				Leading zeros are optional.
View gateway IP	E CG}	WCG	X1$ ]
address

Communication and Control, cont’d