Extron electronic IPL T S1, IPL T S4, IPL T S6, IPL T S2 Setup Guide Checklist, Extron USA East

Page 45

Setup Guide Checklist

cChapter 1: Download and install Global Configurator.

cChapter 2: Make the IPL T S cable connections.

1.c Power

2.c Local Area Network (LAN)

3.c Serial devices

cChapter 3: Create a Global Configurator project file. Add and configure a device. Build and upload the GC project file. Launch the GlobalViewer® interface.

1.c Download device drivers.

2.c Create a new Global Configurator project file.

3.c Add a device.

4c Define the location of the new device.

5.c Save the new Global Configurator file.

6.c Configure contacts.

7.c Configure e-mail.

8.c Assign device drivers.

9.c Set scheduled actions and e-mail deliveries.

10. c Set monitored conditions.

11. c Build the Global Configurator file.

12. c Upload the Global Configurator file.

13.c Change device settings, such as the e-mail server (if desired).

14.c Launch the GlobalViewer interface.

Extron USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500 +1.714.491.1517 FAX

Extron USA - East

+800.633.9876

Inside USA / Canada Only

+1.919.863.1794 +1.919.863.1797 FAX

Extron Europe	Extron Asia	Extron Japan
+800.3987.6673	+800.7339.8766	+81.3.3511.7655
Inside Europe Only	Inside Asia Only	+81.3.3511.7656 FAX
+31.33.453.4040	+65.6383.4400
+31.33.453.4050 FAX	+65.6383.4664 FAX

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568 +86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800 +971.4.2991880 FAX

© 2008 Extron Electronics. All rights reserved.

Image 45

Contents Interfaces IPL T S SeriesSafety Instructions English Precautions安全须知中文 Page Table of Contents Table of Contents, cont’d IPL T S Series Interfaces OneIntroduction About this ManualIPL T S Series Products IPL T S1 Introduction, cont’d Global Configurator Click the Global Configurator icon Installing Global ConfiguratorSystem requirements Click the Download GCSWxxxxx.exe buttonIntroduction, cont’d Two Front Panel Hardware SetupRear Panel Local Area Network LAN Connection Hardware Setup, cont’d Power ConnectionSerial Device Connection RJ-45 Connector Straight-through CableHardware Setup, cont’d Pin D connectorCaptive screw connector IPL T S6 Hardware Setup, cont’d Three Creating a Global Configurator Project File Software SetupStep one download device drivers Click the Add Driver Subscriptions buttonClick the right arrow Subscribe button Step two create a new project Software Setup, cont’dIPL T S Series Interfaces Software Setup Step three add a device Click Edit Add DeviceClick Make this device a GlobalViewer Host if desired Click Auto Configure IP Address Step four define the location of the new device Step five save the new Global Configurator file Software Setup, cont’d Configuring a New Device Step six configure contactsClick Edit Contact Manager Click Edit Email Manager Step seven configure e-mailDriver Configuration tab opens Step eight assign device driversClick Add Driver Step nine set scheduled actions and e-mail deliveries Click Apply Action IPL T S Series Interfaces Software Setup Click Apply Email/Contacts Step ten set monitored conditions Click Apply Condition Click ConditionsStep eleven build the Global Configurator file Building and Uploading a GC FileApply Email/Contacts Step twelve upload the Global Configurator file Step thirteen change device settings if desired Click Tools Change Device SettingsSet Mail Server..., Set Gateway..., Set Subnet Mask..., etc Step fourteen launch GlobalViewer Software Setup, cont’d Launching the GlobalViewer InterfaceIPL T S Series Interfaces Software Setup USA, Canada, South America Japan Central America Extron’s WarrantyExtron USA East Setup Guide Checklist