Remote Operation, cont’d
Using Emulation mode
Emulation mode allows you to set up the software without attaching the switcher to the computer. To use Emulation mode:
1.
2.Choose Emulate, and click OK.
3.Choose an emulation file to open, and click OK. The file DEMO.MTX provides a sample of a completed matrix setup. The file NEW.INI provides a blank setup to get you started.
4.Enter the file name under which you want to save any changes to the file, and click OK.
5.Select 1, 2, or 3 as the number of video boards, 1 or 2 as the number of audio boards, and MAV 84, MAV 128, MAVxxx as the matrix model for which you are preparing a configuration. Click Ok (figure
Figure 4-19 — Emulation mode configuration
6.Continue using the program as described in “Using the software”, steps 3 through 7, beginning on page
Using the help system
For information about program features, you can access the help program in any of the following ways:
•From the Extron Electronics program folder or group, double- click the Matrix Switcher Help icon (shown at right).
•From within the Matrix Switcher Control Program, click the Help menu on the main screen.
•From within the Matrix Switcher Control Program, press the F1 key.