Installation
This section describes information for connecting and wiring the FOX T USW 103. Topics in this section include:
•Mounting the FOX T USW 103
•Rear Panel Features
•Making Connections
Mounting the FOX T USW 103
The FOX T USW 103 can be mounted in a rack, under a desk, or on a tabletop (see
Mounting on page 38 for more mounting details).
Rear Panel Features
POWER | 1 | 2 | |
12V | |||
|
|
0.7 A MAX
h a
3
HDMIHDMI
b
INPUTS | Tx Rx | |
LINK | ||
| ||
AUDIO | OPTICAL | |
|
c d
LINK
FOX T USW 103 | REMOTE | ||||
| CONTACT | ||||
OVER FIBER ALARM | |||||
|
|
|
|
|
|
Tx Rx G 1 2 | 1 2 3 G | Tx Rx G | |||
e f g
Figure 2. FOX T USW 103 Rear Panel Features
Input Connectors
AAnalog video connector — Connect a video source to the female 15 HD connector, labeled input 1.
BHDMI connectors — Connect a source device to either or both HDMI connectors, labeled inputs 2 and 3 (see Connecting HDMI Connectors on page 6). They can accept HDMI, DVI, or dual mode DisplayPort video sources.
CAudio connector — Connect an analog audio source to the 3.5 mm TRS jack. All three video inputs can share this audio input.
Tip (L)
Ring (R)
Sleeve (
)
3.5mm Stereo Plug Connector (unbalanced)
Figure 3. Wiring for Unbalanced Stereo Audio
FOX T USW 103 Universal Switcher • Installation | 4 |