Extron electronic FOX T USW 103 manual Wiring for Fiber Communication

Wiring for Fiber Communication

WARNING: Risk of serious physical injury. This device outputs continuous invisible light, which may be harmful to the eyes; use with caution.

•Do not look into the rear panel fiber optic cable connectors or into the fiber optic cables themselves.

•Plug the attached dust caps into the optical transceivers when the fiber cable is unplugged.

NOTES:

•Ensure the proper fiber optic cable is used for the

FOX T USW 103 and receiver. Typically, singlemode fiber optic cable has a yellow jacket and multimode fiber optic cable has an orange or aqua jacket.

•Only one fiber optic cable, transmitter-Tx-to-reciever-Rx, is required for video, audio, and serial command transmission. However, for only one fiber optic cable:

•The HDMI signal output by the receiver is not HDCP compliant.

•RS-232 reports from a controlled device are not available.

•To receive responses from the controlled device and for HDCP-compliance, install both fiber optic cables.

Tx	Rx
LINK	LINK

OPTICAL

Transmitter

to

Receiver

Tx	Rx
LINK	LINK

OPTICAL

FOX T USW 103 Universal Switcher • Installation 7