Extron electronic FOX T USW 103 manual Reference Information, Tabletop Use, Mounting Kits

Page 43

Reference

Information

This section provides mounting and firmware updating information. Topics in this section include:

Mounting

Updating Firmware

Mounting

The FOX T USW 103 can be placed on a tabletop or mounted in a rack or underneath a desk.

Tabletop Use

Attach the provided rubber feet to the bottom four corners of the enclosure.

Mounting Kits

Mount the unit using any optional compatible mounting kit listed on the Extron website (www.extron.com), in accordance with the directions included with the kit. For rack-mounting, see UL guidelines for rack-mounted devices below.

UL guidelines for rack-mounted devices

The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the FOX T USW 103 in a rack.

1.Elevated operating ambient temperature — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the FOX T USW 103 in an environment compatible with the maximum ambient temperature

(Tma = +122 ˚F, +50 ˚C) specified by Extron.

2.Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is no compromised.

3.Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.

4.Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have an overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5.Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

FOX T USW 103 Universal Switcher • Reference Information 37

Image 43
Contents FOX T USW Safety Instructions English Chinese Simplified(简体中文) Class 1 Laser Product FCC Class a Notice FDA/IEC 60825-1 RequirementsNotifications Specifications AvailabilitySoftware Commands Conventions Used in this GuideContents FOX T USW 103 Universal Switcher Contents System Compatibility IntroductionAbout This Guide About the FOX T USWContact closure remote control availability Key FeaturesHDCP-compliance Typical FOX T USW 103 Application Application DiagramMounting the FOX T USW InstallationRear Panel Features Input ConnectorsRS-232 Over Fiber and Alarm Connector Fiber Optic ConnectorMaking Connections Control ConnectorsPower Connector Connecting Hdmi ConnectorsWiring for Fiber Communication Wiring for Remote Contact Closure Communication Wiring for RS-232 Over Fiber and Alarm CommunicationPower Connector Wiring Wiring the Power SupplyFront Panel Button Combinations for Device Modes Front Panel FeaturesOperation Front Panel OperationSelecting an Input Initial Power UpEnabling Auto Switch Mode Enabling Normal Switch ModeHost-to-device and device-to-host communication SIS Configuration ControlSimple Instruction Set Control SIS Programming GuideUsing the command and response table for SIS commands Error responsesSymbol definitions VGA PC SIS Input Switching Command and Response Tables for SIS CommandsAudio Configuration Horizontal start Picture Adjustment Analog OnlyPixel phase Total pixelsAdvanced Configurations Information requests Device nameStatus request SFP module View internal temperatureFactory reset Upload firmwareTo download the software from the website Installing the SoftwareTo install the software from the DVD FOX Extenders Control ProgramStarting the Software Using the SoftwareFile menu Top MenuTools Menu ConnectDisconnect ExitUnit Info Reset UnitTo update firmware Update FirmwareTrace Window RefreshCheck for Updates ContentsExtron Home About FOX Extenders Control Program Dialog Box AboutStatus panel Main ScreenControl tab Input Selection panelVGA Video Adjustment Panel VGA Video Adjustment panelConfiguration Tab Audio Adjustment panelHdcp panel Advanced Tab Plus Mode Transmission panelVGA Input Video Format panel Audio Input Selection panelSave Edid panel Advanced Configuration panelEdid Configuration Tab Assigned Edid panelImport Edid Panel Import Edid panelExport Edid Panel Export Edid panelMounting Kits Reference InformationMounting Tabletop UseUpdating Firmware Installing Firmware LoaderDownloading Extron Firmware Loader Downloading Firmware from the Extron Website Downloading FirmwareAdd Device... Window Installing Firmware with Firmware LoaderExtron Warranty