Extron electronic FOX T USW 103 manual Export Edid panel, Export Edid Panel

Page 42

Export EDID panel

EDID files on the FOX T USW 103 can be exported to the connected PC. To open and view them, use the Extron EDID Manager software, available at www.extron.com.

The EDID Manager software aids in troubleshooting any EDID related issues that may occur during configuration or operation of an AV system.

Figure 34. Export EDID Panel

1.In the Export EDID panel, select the desired EDID to export from the drop-down list.

2.Click the Export button. The Save As dialog box opens.

3.Select the export destination and file name for the EDID.

4.Click the Save button. The EDID setting is exported.

FOX T USW 103 Universal Switcher • FOX Extender Control Program 36

Image 42

Contents FOX T USW Safety Instructions English Chinese Simplified（简体中文） FCC Class a Notice FDA/IEC 60825-1 Requirements Class 1 Laser ProductConventions Used in this Guide Specifications AvailabilitySoftware Commands NotificationsContents FOX T USW 103 Universal Switcher Contents About the FOX T USW IntroductionAbout This Guide System CompatibilityKey Features Contact closure remote control availabilityHDCP-compliance Application Diagram Typical FOX T USW 103 ApplicationInput Connectors InstallationRear Panel Features Mounting the FOX T USWFiber Optic Connector RS-232 Over Fiber and Alarm ConnectorConnecting Hdmi Connectors Control ConnectorsPower Connector Making ConnectionsWiring for Fiber Communication Wiring for RS-232 Over Fiber and Alarm Communication Wiring for Remote Contact Closure CommunicationWiring the Power Supply Power Connector WiringFront Panel Operation Front Panel FeaturesOperation Front Panel Button Combinations for Device ModesEnabling Normal Switch Mode Initial Power UpEnabling Auto Switch Mode Selecting an InputSIS Programming Guide SIS Configuration ControlSimple Instruction Set Control Host-to-device and device-to-host communicationError responses Using the command and response table for SIS commandsSymbol definitions VGA PC SIS Command and Response Tables for SIS Commands Input SwitchingAudio Configuration Total pixels Picture Adjustment Analog OnlyPixel phase Horizontal startAdvanced Configurations Device name Information requestsStatus request Upload firmware View internal temperatureFactory reset SFP moduleFOX Extenders Control Program Installing the SoftwareTo install the software from the DVD To download the software from the websiteUsing the Software Starting the SoftwareTop Menu File menuExit ConnectDisconnect Tools MenuReset Unit Unit InfoUpdate Firmware To update firmwareRefresh Trace WindowContents Check for UpdatesExtron Home About About FOX Extenders Control Program Dialog BoxMain Screen Status panelInput Selection panel Control tabVGA Video Adjustment panel VGA Video Adjustment PanelAudio Adjustment panel Configuration TabHdcp panel Audio Input Selection panel Plus Mode Transmission panelVGA Input Video Format panel Advanced TabAssigned Edid panel Advanced Configuration panelEdid Configuration Tab Save Edid panelImport Edid panel Import Edid PanelExport Edid panel Export Edid PanelTabletop Use Reference InformationMounting Mounting KitsInstalling Firmware Loader Updating FirmwareDownloading Extron Firmware Loader Downloading Firmware Downloading Firmware from the Extron WebsiteInstalling Firmware with Firmware Loader Add Device... WindowExtron Warranty