Extron electronic ISM 482 manual Output buttons and LEDs, Input buttons, LEDs, and label window

Output buttons and LEDs

2Output 1 and Output 2 buttons — The Output 1 and Output 2 buttons select output 1 or output 2. Press an output button to select that output and automatically deselect the other output (figure 3-3).

Output 1 and 2 LEDs — The Output 1 and Output 2 LEDs indicate the output that is selected (figure 3-3). Only one Output LED can be lit at a time.

Only one of the two outputs can be selected at a time.

1 1 1

Press button

OUTPUTS Press	OUTPUTS	OUTPUTS
button

LED key:

= on, = off

2 2 2

Figure 3-3 — Output selection cycle

When an output is selected, its tied input is indicated by the associated Input LED. You can select a different input to tie to this output by pressing the desired input button.

Input buttons, LEDs, and label window

Front panel input label window

3Input label panel — This translucent panel can be removed and replaced to insert a label behind the panel. To remove the panel, insert the Phillips-head end of an Extron tweeker or small Phillips-head screwdriver into the hole in one end of the panel, and gently slide the tab on the edge of the panel out of the recess in the switcher housing.

Input labels can be created easily with Extron’s button label generator software, which is shipped with every Extron Matrix Switcher, or with any Brother® P-Touch™ labeler. Each input can be labeled with names, alphanumeric characters, or even color bitmaps for easy and intuitive input and output selection (figure 3-4). See chapter 5, “Switcher Software”, for details on using the label software.

INPUTS

Rack DVD (DVS 100)

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8

Figure 3-4 — Sample label

Integration Scaling Matrix Switcher • Operation 3-3