Extron electronic IPI 100 Series, IPI 200 Series manual X1@ CN Ipn X1@ , Cn, IpnX4 , X1@ or X4

IPI 100 Series, IPI 200 Series • Programming and Control

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional
	(host to intercom)	(host to intercom)	(intercom to host)	description
IP setup commands
Set the unit	E X1@ CN}	W X1@ CN	Ipn• X1@ ]	Change the IPI’s name to
name24				one of your choosing (X1@),
				such as “AuditoriumIPI”,
				“Rm316-AVcenter”, or
				“exec-boardroom-ctrl”. The
				name consists of up to 24
				alphanumeric characters (and
				the minus sign). The first
				character must be a letter,
				the last character cannot be a
				minus sign (hyphen). Case
				does not matter.
Set unit name to	E •CN}	W%20CN	Ipn•X4( ]	X4( = the name the IPI
factory default24				was shipped with: IPI 104
				‑##‑##‑##, a combination of
				the model name and the last
				3 pairs of hex numbers in the
				controller’s MAC address
				(e.g., IPI-104-IP-00- 02-3D).
Read the unit	E CN}	WCN	X1@ ] or X4( ]	X1@ is the IPI’s current, user-
name				defined unit name.
				X4( is the IPI’s factory

default name.

5-15