Extron electronic IPI 100 Series manual Command Ascii Telnet URL Encoded Web Response Additional

IPI 100 Series, IPI 200

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional
	(host to intercom)	(host to intercom)	(intercom to host)	description

NThe current directory is determined on a per-connection basis. At the beginning of each IP connection/session, the current directory is selected as the root directory.

NDirectory = A text string drawn from the alphabet (A~Z), digits (0~9), minus sign/hyphen (-), plus sign (+), or colon (:). No blank or space characters are permitted as part of a name. No distinction is made between upper and lower case. The first character must be an alpha character. A directory does not truly exist until a file has been copied into that path. Unlike various PC operating systems, a File and Directory on the Extron product are allowed to have the same name. The current directoy is a per-connection setting. It begins at the root for each new IP session.

Stream Files via Telnet or RS–232

Series • Programming

Load a file to user flash memory

Retrieve file from user flash memory

E + UF filesize,	Upl]
filename}
E  filename SF}	{responds with 4‑bytes
	of file-size + raw
	undprocessed data in file}}

and Control 5-27

NIf there is insufficient space on a box to store the sent file, response will be “Fld] “ instead of “Upl]” to denote failure.

NUpdating firmware can be done by loading an .S19 file with this command. If the box determines that the .S19 file is not intended for this product, the “Upl]” response is followed by an “Fwm]” response (Firmware mismatch).